Type in the full discussion title or a part of it.
Discussion Title Created date
Is it Real?
Hi guys, I've designed a scheduler for embedded systems aimed squarely at mid-range 32bit systems.  Interrupts and Exceptions are never disabling by the OS and API calls can...
Thursday, 2 August 2018 - 21:03
Requirements of a RTOS
Can I ask guys, I designed a RTOS recently and it never disables interrupts or exceptions, they always answered straight away.  However, RTOS api calls may be deferred....
Monday, 30 July 2018 - 15:55
c editor
Is there an editor that allows you to copy c code text and paste it with the code highlighted in color
Monday, 23 July 2018 - 00:25
Non Maskable Interrupt
Hi freaks, just a quick question.  The NMI Interrupt is handled in the exception.s file.  Can you disable the NMI by Disabling exceptions? 
Thursday, 12 July 2018 - 18:30
Initial VGA Timing conditions
Hi guys, have a look at this vga timing example.     So at the Start (initialisation) do I do the v-sync pulse, then begin the first line and at the end of that line is...
Sunday, 8 July 2018 - 18:52
Schematic tools
Could one of you nice guys recommend schematic software that is free?
Thursday, 5 July 2018 - 01:11
DMA for memory output on port
Hi guys, I reasonably comfortable with DMA transfers using the DMA controller that targets peripherals but I don't know how to do memory output.  I think I have to use a IRQ...
Monday, 2 July 2018 - 02:33
vga timings
what vga resolution do you think is possible with a UC3 (dedicated) running at 66MHz dedicated to the vga ADV7120.     http://www.tinyvga.com/vga-timing  ...
Sunday, 1 July 2018 - 02:18
VGA, DAC Chips
Hi guys, I'm looking for three DAC chips for a VGA Driver.  Given that the VGA RGB Signals are in the range of 0 - 0.7volts what would be a good DAC to use..   Thanks,...
Friday, 29 June 2018 - 03:24
TWI - I2C help
Hi guys,  I need to write the driver for TWI to send and receive byte on the TWI port.  I'm studying a Framework example and can't quite see how it actual write and...
Thursday, 28 June 2018 - 00:10
SPI bus???
I'm interested in interfacing a CMOS Camera to the UC3.  The UC3 has SPI ports.  Now the camera module, (OV7670 FIFO) has the following two interface pins, SCCB_C and...
Sunday, 24 June 2018 - 18:26
Assigning Priorities
Hi freaks, just want to run a question pass yous all.  What method do you use when assigning priorities to interrupts?  i.e. the shortest routines are assigned a higher...
Tuesday, 8 May 2018 - 23:56

Pages