Post Created date
Is mega8535 supported by AvrStudio 6?
  I just copied ATmega8515_stk500.xml   to  ATmega8535kz_stk500.xml and I replace inside the text where: <device name="ATmega8515"> with <...
Wednesday, 25 February 2015 - 15:29
Is mega8535 supported by AvrStudio 6?
But before I always used STK500 for programming ATmega8535. For sure STK500 supports ATmega8535. I think something wrong with the new version of AVR Studio.
Wednesday, 25 February 2015 - 13:30
Is mega8535 supported by AvrStudio 6?
  I talking about ATmega8535 that there is not in the list. I can see only ATmega8515   I doing something wrong?
Wednesday, 25 February 2015 - 12:57
How to read low, and high byte from constant in AVR GCC
thank you guys
Saturday, 28 August 2010 - 15:12
problem with adm483, often burn!!!
thanx for your responses, Before in other projects I din't have problem like this. I will check again carefully my PCB, and I will follow your suggestions. I hope to find...
Friday, 22 January 2010 - 09:23
problem with adm483, often burn!!!
This is the schematic for mega8 and adm483. Both devices are exactly the same, just the software changes. Temporarily I dont have put any terminal resistor in communication line...
Thursday, 21 January 2010 - 12:27
IAR C, Safe settings for CSTACK - RSTACK - HEAP
so if I exceed the CSTACK from my application, IAR C compiler will have any warning?
Tuesday, 5 January 2010 - 13:41
IAR C, Safe settings for CSTACK - RSTACK - HEAP
RSTACK if am well undestanding, is for return address stack so if my program is not exceed the 30 nested calls RSTACK = 35 must be safe. Right? But I am not sure for the CSTACK....
Monday, 4 January 2010 - 18:08
IAR C, how to read a word from program memory?
ok, thank you. I will follow your way.
Saturday, 2 January 2010 - 17:29
IAR C, how to read a word from program memory?
__load_program_memory is for return one byte, right? How can return a word (2 bytes);
Saturday, 2 January 2010 - 16:54
connection of PC rs232 with rs485 network
Yes, I red it. I communicate at 9600, and I still not have any problem with the communication, but I worry a litle bit. Does any body has a better idea on how to communicate PC-...
Monday, 15 June 2009 - 07:46
connection of PC rs232 with rs485 network
thank you all guys, finally I made an RS232/RS485 converter according to this site: http://www.airborn.com.au/layout... It works. Jim, I develop the software of mega8 with AvrGcc...
Sunday, 14 June 2009 - 12:03

Pages