Type in the full discussion title or a part of it.
Discussion Title Created date
Has anyone been able to use FTDI VDRIVE2 ?
add USB Flash Drive interface to 8 bit MCU. Found here :http://www.vinculum.com/document... or here http://www.cutedigi.com/product_...... It says, easily add USB Flash Drive...
Sunday, 7 March 2010 - 19:58
Has anyone been able to use SparkFun OpenLog?
Has anyone been able to use SparkFun OpenLog as a datalogger via the use of seperate microntroller, such as an arduino? http://www.sparkfun.com/commerce... http://wiki.github.com/...
Wednesday, 17 February 2010 - 20:20
??? About USB converters, different types ?
It seems that there are at least two types of USB conversion programmers. 1) (FTDI)Uses RX, TX, RESET, 5v(vcc), gnd pins 2) A type that uses the ISP pins of Atmega...
Saturday, 6 February 2010 - 21:47
Question about AVR bootloaders and/or programmers?
I need to have my memory jogged about these things. I found a universal AVR bootloader(download) on the internet? If this is downloaded into a microcontroller, such as an...
Monday, 1 February 2010 - 22:51
Can an Arduino/atmega328 be used with full feature FAT16
I have an Arduino Pro 328 - 5V/16MHz sku: DEV-09219 (bought it from Sparkfun). Can the atmega328 be used for full featured FAT16 ? I also have an atmega128 board, can that be used...
Tuesday, 17 November 2009 - 05:37
Voltage reduction, 12v - 5v for atmega168 use?
I want to use an atmega168 board on my motorcycle. The board needs 5v for operation, and I want to use the bikes 12v battery to power the atmega. So I need to drop from 12v to...
Wednesday, 29 April 2009 - 20:42
Use of a system called " FFat " to store/ read dat
I know this goes back in time a couple of months. It concerns using an atmega chip to control the storage of data on an external storage device. The site, Chan's site,...
Tuesday, 14 April 2009 - 20:18
Help with WinAVR: "no rule to make target (aa.elf)&quot
I get this error message when I make all: make exe. no rule to make target 'pgm.elf', needed by 'elf' STOP I'm working with Programmer's Notepad. Could the problem be in the...
Tuesday, 3 February 2009 - 06:20
What types of programmers can be use with AVR studio?
I have two programmers that are to be connected to PC's parallel port. One is a STK200/300, The other is a homemade jobby that I built using directions given out by Arduino, it...
Sunday, 25 January 2009 - 20:22
Using WinAVR, and/or AVR studio - seperately or together?
Using WinAVR, and/or AVR studio. Can they be used together, or must they be used seperately? Will one interefere with the other? Does each have a special purpose...
Wednesday, 21 January 2009 - 05:52
Need info on sending data to external EEPROM (24LCXX) ?
I'm trying to send data to an external EEPROM by useing code from Bascom-AVR samples file, 'name : i2c.bas 'copyright : (c) 1995-2005, MCS...
Monday, 12 January 2009 - 03:30
Extreme newbie with WinAVR needs help ?
I've been working with Bascom-AVR and PBASIC, and have done alright. So, I downloaded WinAVR, and its quite confusing. When I open WinAVR 20081205, I get a page with several...
Monday, 5 January 2009 - 03:38

Pages