Post Created date
[TUT] [C] GCC and the PROGMEM Attribute
Hi, frist of all thanks for the tutorial ;-) let's see if I get it: 1) it's the same to declare const uint16_t prior0[10] PROGMEM = {100, 360, ..., 120}; and const...
Monday, 22 June 2009 - 20:21
[SOLVED][C]Bluetooth/USART interrupt interference
sorry if I didn't answered you... we are using the iWRAP stack from bluegiga, which is implemented on the wt12.
Friday, 13 March 2009 - 12:13
[SOLVED] BLIPS 4 bootloader via Bluetooth/USART
I finally solved the problem, so i hope this can help others... at reset, during WT12 initialization, this tranciever sends some data to the mcu, so the bootloader always entered...
Wednesday, 4 March 2009 - 18:01
[SOLVED] BLIPS 4 bootloader via Bluetooth/USART
hi, today i tryed again, but with no luck... my project is all written in c, with avrstudio + winavr, so I think there aren't problems. when I burned the bootloader.hex on the mcu...
Tuesday, 3 March 2009 - 20:42
[SOLVED] BLIPS 4 bootloader via Bluetooth/USART
sorry, I tought this section is also for project releated topics...
Monday, 2 March 2009 - 01:24
[SOLVED][C]Bluetooth/USART interrupt interference
I solved all the problems! the problems were generated at the restart of the system, and lead to a first interrupt that wasn't supposed to come so it was mis-handled. I found 2...
Sunday, 1 March 2009 - 15:52
[SOLVED][C]Bluetooth/USART interrupt interference
... I tryed everything but it don't work properly! now my situation is: I initialize the UART0 without enabling the RX interrupt, which is enabled just before the infinite loop. I...
Tuesday, 24 February 2009 - 18:36
[SOLVED][C]Bluetooth/USART interrupt interference
I think it's the same tutorial that Stu already linked in his post and now I'm following it... ;) thanks, bo.
Tuesday, 17 February 2009 - 18:06
[TUT] Modularizing C Code: Managing large projects
ok, thanks! I'll include those vars as a sub section of the GlobalHeader.h, which goes everywhere... bye, bo.
Tuesday, 17 February 2009 - 18:04
[TUT] Modularizing C Code: Managing large projects
Thanks for this very good tutorial! :D I'm just re-organising a large project, but I've got some problems with global vars. this is my situation: I've got several source files...
Tuesday, 17 February 2009 - 17:30
[SOLVED][C]Bluetooth/USART interrupt interference
thanks a lot! I'll definetly change that ISR! I was already thinking about using a circular buffer/ISR for the transmit code ;) I haven't started this project so I'm organizing...
Tuesday, 17 February 2009 - 16:00
[HELP]problem with eeprom...
Hi, i've defined idCube, in my header, but because of the source project in asm i had definitions like: #deine idCube = 1 and that '=' caused all my troubles... thx for the help,...
Tuesday, 20 May 2008 - 10:49