Type in the full discussion title or a part of it.
Discussion Title Created date
using the RZRAVEN firmware with AT90CAN128
Does the firmware running on the RZRAVEN kit can be used with the AT90CAN128 microcontroller????? Svm Prasad
Monday, 20 October 2008 - 08:26
Difference B/W Bread board and PCB
Hai All, I have done a design with ATmega16 in bread board. It is working well in bread board. After I assembled in PCB [4-layer PCB] it is not working. What are the problem...
Monday, 11 August 2008 - 14:42
About RESET pin [ATmega16]
Hai All, Is RESET pin being high always? Svm Prasad
Thursday, 7 August 2008 - 14:52
Different b/w internal RC and Ext.crystal
Hai all, what are the differences between using internal RC oscillator and external crystal? which one is the best method? Will crystal affect any clock performance? Svm Prasad
Tuesday, 29 July 2008 - 10:27
Problem with External Interrupt
Hai All, I configured[ATmega16]INT0 as an input.[Rising Edge]. That is open. If touch that pin,it generates interrupt. What could be the problem? Is the problem related to HW or...
Wednesday, 23 July 2008 - 06:57
Clock Selection
Hai All, I have a doubt in clock settings. If I set clock frequency of 8MHz in project configuration. What will happen? After downloading the code into MC, will it work on 8MHz?...
Thursday, 17 July 2008 - 09:39
SPI Clock
Hai AVR lovers, MCU-ATmega16 I set registers to get SPI clock frequency of 4MHz. DDRB = (1<<DDB7)|(1<<DDB5)|(1<<DDB4); PORTB = (1<<PORTB4); SPCR = (1...
Wednesday, 16 July 2008 - 15:08
Using Program Memory
I am using progmem in my project to store some constant data. After adding that progmem code, my previous part is not working properly. Help me to solve this problem. Svm Prasad
Thursday, 10 July 2008 - 15:35
ATmega16 SRAM read and write in C
Hai all, Just I found two instructions for SRAM in manual. [LDS,STS]. How can we use SRAM in ATmega16 for reading and writing oprations by C code? Svm Prasad
Monday, 7 July 2008 - 11:12
Memory Allocation in AVR
Hi All, How can we identify the address of the variable declared in a structure? I checked in .lss file, I couldn't find any address of my variable.
Tuesday, 1 July 2008 - 15:47
Memory Allocation in AVR
Hi All, How can we identify the address of the variable declared in a structure? I checked in .lss file, I couldn't find any address of my variable.
Tuesday, 1 July 2008 - 15:12
SPI sharing
Im using SPI for reading SD card and I need to send datas to STA013 via same SPI. Sharing methods are welcome...
Wednesday, 25 June 2008 - 14:57

Pages