Post Created date
Network reconnect when sending custom payload on WSNDemo
There are significant fixes in BC14 which are not radio chip specific, those are useful. New features are not required. The RF230A libraries are available in BC14, no need to...
Wednesday, 30 January 2013 - 05:25
Network reconnect when sending custom payload on WSNDemo
This is really frustrating. Devices now work with RF230 library, as opposed to RF230B. There are numerous errata for RF230 that have work-arounds. These are most likely causing...
Tuesday, 29 January 2013 - 10:04
Network reconnect when sending custom payload on WSNDemo
Ugh! Think I've been chasing a non-problem. It seems that WSNDemo has changed from using RF230 to RF230B ! I used the makefiles from there as a quick route to getting up and...
Tuesday, 29 January 2013 - 09:20
Network reconnect when sending custom payload on WSNDemo
From sniffer output: Co-Ord using BC14, Router BC12 Router sends Beacon Request, Co-Ord responds with Beacon. Router stops requesting beacons. Co-Ord using BC12, Router BC14:...
Tuesday, 29 January 2013 - 09:07
Network reconnect when sending custom payload on WSNDemo
Can't be specific on ISRs since I have source under NDA, etc. but look around for the function phyDispatcheRfInterrupt(). Am waiting for BC 14 source which may help to debug this...
Tuesday, 29 January 2013 - 07:25
Network reconnect when sending custom payload on WSNDemo
I will setup a sniffer. Drawback is it requires a (rarely used) Windows machine and all development here is under Linux. The beacon frames may be a red-herring. I had all nodes...
Tuesday, 29 January 2013 - 07:18
Network reconnect when sending custom payload on WSNDemo
I won't argue over ISR code either :-) The following is just my opinion and result of a lot of experience. There isn't as much inlining as there should be and its possible to...
Tuesday, 29 January 2013 - 07:11
Network reconnect when sending custom payload on WSNDemo
Excluding security, which isn't used, these are the changes in csDefaults.h 26c26 < #define CS_MAC_FRAME_RX_BUFFER_SIZE 132 --- > #define CS_MAC_FRAME_RX_BUFFER_SIZE...
Tuesday, 29 January 2013 - 07:04
Network reconnect when sending custom payload on WSNDemo
I'll look into buffer sizes. My confidence in BC 14 took a knock when WSNDemo wouldn't compile under Linux via 'make'. The incorrect makefile is specified and the dependencies are...
Tuesday, 29 January 2013 - 06:51
Network reconnect when sending custom payload on WSNDemo
The test network is not large (6 nodes) but there is a fairly large amount of data being moved around. The facts are still that BitCloud 12 works. Also that BitCloud 14 Co-Ord...
Tuesday, 29 January 2013 - 06:27
Network reconnect when sending custom payload on WSNDemo
Nothing obvious with CS parameters. Its not clear what the resolution was to the original posters problem. Is this not similar / related?
Tuesday, 29 January 2013 - 06:10
Network reconnect when sending custom payload on WSNDemo
Will investigate CS parameters. I've inspected pretty much everything else.
Tuesday, 29 January 2013 - 05:57

Pages