Post Created date
Eclipse AVR Tutorial
You should not have to be root to use avrprog with a usb device. Modify your udev rules.d to change the permissions of your programmer to a group of your choice. See your distro...
Sunday, 9 May 2010 - 04:54
Fast Avr 4 and 1Wire
js wrote:Quote:WHY are people refusing to read the datasheets Can you give me a link to the datasheet please? The datasheets in question are the Dallas/Maxim 1-wire sheets, which...
Sunday, 9 May 2010 - 04:40
Casting Question
If you are ABSOLUTELY sure that passing a uint_8* is harmless ESC_Button((uint16_t *)&theuint8, lastSetting); But I think that makes way too many assumptions.
Sunday, 9 May 2010 - 02:49
Fast Avr 4 and 1Wire
js wrote:Quote: write a code for 19s2313 That chip is extremely hard to write code for. I beg to differ. It's quite possible to generate code for it, the issue is where the IO is...
Sunday, 9 May 2010 - 00:53
Do USB cables really need ferrite chokes?
You're thinking of an anechoic chamber. Those cost quite a bit to rent, but I found preliminary testing in building basements quite useful.
Sunday, 9 May 2010 - 00:48
Dragon defunct?
It could be the NLAS2066 analog switch that is fried. With some careful soldering, that can be replaced.
Saturday, 8 May 2010 - 14:34
avr 8515
This is a classroom assignment. Its primary objective is to help you learn. What have you done so far, and what are your problems?
Saturday, 8 May 2010 - 07:37
STK500
It's documented in the AVR studio tool help menu and the STK-500 user manual, under the section 3.8.4 Clock Settings.
Saturday, 8 May 2010 - 04:27
256 bit shift register required
LDEVRIES wrote: For interest sake, I am building a "huff & puff" oscillator stabilizer, using a tinyAT rather than a PIC. http://downloads.hanssummers.com/ttjun07.pdf Note...
Sunday, 2 May 2010 - 00:50
Buying devices programmed?
There are several posts on this forum regarding this issue. Most seem to suggest ISP anyway. Is there any specific reason why you cannot route the SPI pins out? If not, for the...
Saturday, 1 May 2010 - 01:02
port voltage
It's documented in the datasheet for your desired microcontroller under the "Electrical Characteristics" section. Observe V_{OH}
Friday, 30 April 2010 - 15:01
Simple DC-DC with wide Vin
National has the LM557x series controller. IIRC the MOSFET is internal, and all you need to provide is a Schottky and the inductor.
Thursday, 29 April 2010 - 15:06

Pages