Post Created date
two timers using single 555
A couple of points for the 555: The NE555 variants can source 200mA, far more than the AVRs. Also, they work up to 15V, which is handy if you want to drive MOSFETs directly. If...
Sunday, 8 August 2010 - 03:46
BASCOM demo limit
Google says 4K. Perhaps the next time you might want to try that?
Saturday, 31 July 2010 - 08:14
HOW TO CONNECT INTEL 28F128J3D FLASH TO AP7000 ?
I don't have the datasheet with me right now, but I suspect the reason you've been advised to ground A0 is due to the fact that addressing is 8-bit byte aligned. However, the...
Monday, 26 July 2010 - 00:12
USB 2.0 modem to atmega32. How do i connect and send sms...
What have YOU done for YOUR final year project that will earn YOU YOUR academic qualifications so far?
Tuesday, 20 July 2010 - 23:49
C to hardware [for Altera NIOS II]
There is System C, but it still feels like writing verilog. AutoESL also has AutoPilot, which is one of a class of high-level synthesis tools. Perhaps ask for a demo?
Saturday, 3 July 2010 - 10:02
Sorry Guys, AVRGcc is crap....NOT!
Bingo600 wrote:avr-gcc was actually the primary reason i chose AVR , and not "The MCU that must not be mentioned" I am using GCC for the larger families of "The MCU that must not...
Saturday, 3 July 2010 - 02:09
Finding the right oscilloscope
I've got an Instek GDS-1102A. The A suffixed models have a 2M/channel capture depth when triggered in Single mode, which is nice to decode long I2C or SPI trains. However, the on-...
Thursday, 1 July 2010 - 01:34
Measure sinusoidal frequency with ATmega32
If you'd show us what you've done, we'd be able to guide you in the specific areas that you are experiencing trouble in. We're not going to do your project for you.
Thursday, 1 July 2010 - 01:28
Driving a 12V fan with an AVR
Remember to take into account the fact that, during the switchoff period, the pwm signal is usually inhibited.
Sunday, 27 June 2010 - 01:17
How to design something that can last long (years)?
So will the OP be telling us what exactly he's planning to design that requires a power source for that long?
Tuesday, 22 June 2010 - 22:55
How to design something that can last long (years)?
cheungupdt wrote:timgoh0 wrote:Don't forget that your battery has a self-discharge. Have you considered energy harvesting (from vibrations or an antenna) instead? How do i get...
Sunday, 20 June 2010 - 11:22
AVR function for confidence interval count
Sure, you're probably welcome to (under the terms of the GPL) extract the relevant bits of PSPP for your application. Whether you have sufficient on-chip resources to do this is...
Sunday, 20 June 2010 - 01:56

Pages