Post Created date
Rigol Scope Help, Blurred Image
There should be some "reset to factory default" option on your scope. Try that?
Wednesday, 29 September 2010 - 08:42
Rigol Scope Help, Blurred Image
Are you averaging samples? There's a "Acquire" button on the scope, it should be set to "normal".
Monday, 27 September 2010 - 20:59
Rigol Scope Help, Blurred Image
I am having trouble visualizing what you're saying. Perhaps a photo, or a capture from the scope?
Monday, 27 September 2010 - 20:17
AVR + Digital Camera (e.g. Canon, Nikon etc.)
a) You will have to pretend to be a host device b) The protocol is not standard across all cameras. I'd suggest you look at alternate ways of triggering the camera. Perhaps there...
Wednesday, 22 September 2010 - 10:40
parallel-port-programming
Nope, no parallel ports here on the 4 machines sitting at my desk. No parallel ports on the 12 assorted non-x86 machines behind me either, unless you count SCSI. No parallel ports...
Monday, 13 September 2010 - 03:33
Simulation for Interrupts in Simulator 2
js wrote:Why would you put an ISR in the middle of a while loop? :roll: Err, there's only one while loop, and it's empty and closed.
Tuesday, 7 September 2010 - 03:58
How do I use the JTAG port to test IO pins?
clawson wrote: What does that matter? I believe that the point of Boundary Scan would be to, completely without intervention from the processor, and the internal memory and...
Saturday, 4 September 2010 - 11:29
How do I use the JTAG port to test IO pins?
The IEEE 1149.1 section in the datasheet of the JTAG supported sheets details boundary scan operations, along with the scan order. Any suitable board tester should be able to...
Saturday, 4 September 2010 - 03:47
Looking for intro to USB C APIs
bluedalmatian wrote: Theyre absolutely tiny and the pins stick out less than 1mm and less than 1mm wide. Theres no way I can hand solder those onto one of those adapters. Even...
Thursday, 2 September 2010 - 15:53
Dealing with packets....?
Phil.Barlow wrote:1. In terms of C, a packet is like a structure. You define it and then populate it with data. That might lead to some (un)pleasant surprises with the concept of...
Wednesday, 1 September 2010 - 01:53
I love 8-bit AVR but need more power!
I'm thinking the Luminary (now TI) Stellaris range found http://www.luminarymicro.com/ Driverlib is your library. lwip handles the higher IP/TCP stack. USB is handled by another...
Wednesday, 1 September 2010 - 01:47
ATmega328P, external oscillator & OSCCAL
Also consider the thermal stability specs of the average crystal. I wouldn't be surprised if it were 1ppm/degC or somesuch. Simonetta, you've heard of crystal penning, right? :D...
Sunday, 29 August 2010 - 16:26

Pages