Post Created date
Timers & counters
Perierge pes sta Ellhnika ti 8es na peis sto mail mou giati den se piano I' m sory to all of you for my Greek but I cannot understand his English Thanks, Michael
Wednesday, 7 September 2005 - 17:23
Consistent A/D readings?
Ok Outer_Space I realy agree with you, believe me, I know what the data sheets says. But try to check a sum of all these things and try the cost to the production. There are a lot...
Saturday, 27 August 2005 - 14:51
Consistent A/D readings?
Hi there, I always (if there is no press of time and no need of fast measurements) run a rolling average or a simple average routine. This is a good method to do simple works but...
Saturday, 27 August 2005 - 07:21
Thermometer with AT90S4433
Sory you try to tell as that you cannot find a way to read voltages lower than 2 V? 2343 is a very old controller and I don' remember if a have a piece of it but using a tiny13 (...
Friday, 26 August 2005 - 17:23
x0xb0x
You that selling your knowledge and ideas you can make money? Keep on your work.
Friday, 26 August 2005 - 16:28
PLC Replacement Project - Complete
Congratulations to Mr. Richard-Hoehn Could you post some of your PLC abilities. I try some ideas for my PLC project with: 16 inputs (8 analog) 10 outputs (2 analog-PID) a lot of...
Friday, 26 August 2005 - 16:23
help needed for avr atmega 8535
Ha ha ha. Cliff, don't be so bad.
Friday, 26 August 2005 - 16:01
Mega16 Seven segment display
Hi there Let's say that you have 4 common cathod displays. You have connect a npn (BC817) to the GND pin (common cathod) of each display as a switch (4K7 base resistanse and 47K...
Friday, 26 August 2005 - 15:56
help needed for avr atmega 8535
Excuse me, I don't understand the meaning of "i cant understand the datasheet". Could you post some of your questions? Michael
Friday, 26 August 2005 - 15:26
How can I use the second function of each port?
Why don't you reed the data sheets. Everything is there. You can enable the second function by seting some bits. Michael
Friday, 26 August 2005 - 15:18
AD Conversion modes - free running and auto trigger - ADIF
Hi there, I think that there is no need to talk with instructions so I will give you my idea in human words. First off all If you have more than one AD chanels to read I suggest...
Thursday, 25 August 2005 - 18:00
newbie looking for info on how to get started with WinAVR
Hi there 1. Why don't you start by reding the AVR's data sheets, to understand the mechanism, how the commands be executed and how the procesor works. 2. There is no need to start...
Thursday, 25 August 2005 - 17:34

Pages