Post Created date
Binary in watch window????????
I realy thank you ror your reply but you have to know that standing behind a monitor you know sometimes may be wrong. My realy job is a fisherman but I work with micros everyday...
Thursday, 27 October 2005 - 17:02
USART question. AVR 128 mega
What can I say. I tried the same thing with a Mega16 and the hyper terminal. Everything is OK. I tried this with the mkII in step mode and everything seems Ok. Which Emulator are...
Saturday, 22 October 2005 - 11:38
Hi there There are many ways to do this 1. Using a fast PWM output you can make swuare waves with variable Duty Cycle. Using an external RC circuit you can make tringle waves....
Tuesday, 20 September 2005 - 18:08
ATmega8: UART and LCD simultaneously?
Sory this is Michael again If there is not a reason to read datas from the LCD then connect the R/S to GND, connect the Higher nible to 4 of your PORTB i/os (in order to make a 4...
Friday, 16 September 2005 - 16:44
ATmega8: UART and LCD simultaneously?
Hi there Some time ago I made something like this, but because of the same reason I used a Serial to parallel Shift Register CMOS chip. (CD4094) Using this chip you have a 3 wire...
Friday, 16 September 2005 - 16:35
Data structures & conversions
Hallo Periergos The code is: As you said the Datas are in the SRAM Address SRAMAddressRegisterHigh and SRAMAddressRegisterLow Let's say at 0x00A0 (High byte) and 0x00A1 (Low Byte...
Friday, 16 September 2005 - 16:01
At mega 8535 multiplexing the ADC
1. It would be better to use single conversions (not free running mode) 2. In single conversions you can change the channel after an end of a conversion 3. In free running mode...
Thursday, 15 September 2005 - 16:06
Need Help with AVR Studio
Start reading the datasheets, you have to learn about the AVR's CPU
Saturday, 10 September 2005 - 06:34
JTAG ICE mk-II won't talk to my PC ??
The same with clawson
Saturday, 10 September 2005 - 06:00
Newbie: Timer/Counter0
Can you tell us your interrupt frequncy as shown in the stop watch???
Saturday, 10 September 2005 - 05:41
Help me !
Hallo friend To have a start point: .org 0x0000 (origin 0x0000) is the Reset interrupt vector Flash address. It means that whenever the program resets (from external or watchdog...
Saturday, 10 September 2005 - 05:35
Timers & counters
Hello Periergos (That is a good name!!!) Listen, 1. Build a software Timer Interrupt 2. Locate 16 addresses of SRAM as .equ _SRAM_REAL_TIMER_0 =0x0060 .equ...
Thursday, 8 September 2005 - 16:32