Type in the full discussion title or a part of it.
Discussion Title Created date
IR control with code
Hi there, I am searching for a low cost (1 button) Infrared Remote controller. With the characteristics below: - Ready product (in plastic enclosure) / not module only - It must...
Thursday, 26 May 2011 - 07:33
ATtiny4/5/9/10 series have no BOD
Hi guys, While searching for a micro for a new project I show the 6 pin AVR series. I am talking about the tiny4/5/9/10 series. While designing the new design I realised that the...
Thursday, 17 March 2011 - 12:12
Standards question
Hi guys, On Building electrical installations, electricians ensure that when the wall switches are inactive, showers bulbs carry only the neutral (N) and the electrical signal (L...
Monday, 14 March 2011 - 09:09
AC Relay coil
Hallo guys, I am looking on the technical characteristics of the RX series relay: http://www.farnell.com/datasheet... I would like to simulate the 230Vac relay coil, but there is...
Monday, 7 February 2011 - 12:53
SIM Holder DETECT signal
Hi guys, I have ordered some samples of the 0912360002 (MOLEX) SIM holder component. Currently I am designing the .sch. Looking at the signals of the SIM holder I see: Vdd RST CLK...
Thursday, 20 January 2011 - 06:47
mini USB step model
Hi guys, Does anybody have a B-mini USB step model? I would like to import it to my Altium Library. Best regards.
Tuesday, 18 January 2011 - 09:51
LCD mounting
Hi there, I am using a 240 x 128 LCD. The LCD module has a 22 Male pin header and the mainboard has a 22 Female pin header (8.5mm tall). That way the the LCD module is electricaly...
Monday, 29 November 2010 - 08:13
IEC standard: Mains Luminaire Control via a Relay
Hallo guys, I know this is not the right forum for a question like that, but I don't know where could I post it. I would like to make an equipment for controling mains luminaires...
Tuesday, 2 November 2010 - 16:14
Small Battery RFID >1m distance contact link
Hi there, I am going to make a research. I would like to build a very low energy RFID Read only tag base, been supplied by a small battery. Let's say the CR2032 or similar or more...
Friday, 15 October 2010 - 06:01
Female connector Part number
Dear guys, I am looking for a connector Female Header, in order to connect my LCD display. The display pins thickness is 0.6mm. Currently I am destroying DIP sockets to do my job...
Friday, 25 June 2010 - 11:40
AVRStudio 4.18, JTagIce mk2 drivers missing
Hi there, It's the first time of installing AVRStudio in this computer, so I decided to download the newer version (4.18 + SP1 + SP2). I installation is done and now I am...
Thursday, 24 June 2010 - 10:11
Dear guys, I have a LED Display in my hands. It is not a 7-seg but a 3-seg component and displays an ARROW in red colour. The part number is: FTTL-E11502-GF8W-ARROW Does anybody...
Tuesday, 22 June 2010 - 06:09