Type in the full discussion title or a part of it.
Discussion Title Created date
ATtiny2313 - Dean's Timer Tutorial Question
Hey Guys I've been working through Dean's AVR timers tutorial. (btw, great tutorial Dean, really awesome work). I've worked through the tutorial up to part 6: Pure Hardware CTC....
Saturday, 11 February 2012 - 16:54
ATtiny2313A, AVR Studio4/5, AVRISP MkII
Good morning all Ok, so I bought myself an AVRISP MkII, did the board layout, purchased all the components and build the board. Installed AVR Studio5 and tried to connect to the...
Saturday, 13 August 2011 - 07:06
Communication and Setup
Good day all I need some recommendations on how and with what to do the following project. I want to start building a system that will start relative small but that will be...
Friday, 1 July 2011 - 05:27
How can I slow down the ADC
Hey Freaks. I've build a temp display using an Atmega8. I read the temp from an LM35 (going to change as soon as I get hold of another temp sensor that can give negative temps but...
Saturday, 24 April 2010 - 15:06
ADCH 8bit --> 2 x 4 bit conversion
Hey AVRFreaks When you read the ADC0 on an Atmega8, you get an 8bit value in the ADCH. I hope I'm correct on that. I want to display the ADC reading on 2 x 7 segment displays...
Tuesday, 20 April 2010 - 20:07
7 Segment does not make sense
Heu guys. It's been a while since I worked on my electronics and posted on AVR freaks. Well, I'm back in the industry and I have an urge to build things again. I'm building a...
Sunday, 18 April 2010 - 20:16
Counter Problems
Hi Guys. Don't know if I should say welcome back or if you guys must say it to me? It's been a long time since I last visisted freaks. Anycase, happy new year to all. Hope this is...
Wednesday, 7 January 2009 - 12:04
Pressure Sensors
Hey all the freaks. Its been a while. How are everyone doing? I've been busy, very busy. I have a quick question. What type of pressure sensors do you get and what will be the...
Friday, 24 October 2008 - 15:53
Storing Values of Keys pressed in sequence
Hey Guys I'm trying to store values of keys presses in a sequence they have been pressed. Each key must only be able to be pressed once until reset has been pressed. Once all 10...
Friday, 11 July 2008 - 23:43
Code simplification
Hello. I have completed my project. Things is running smoothly (with a few hickups). Ok, before I get all sorts of we not going to do your degree, we have our own etc........this...
Wednesday, 11 June 2008 - 10:59
STK500, STK600 or something else
Hey all the clued up guys. For the past 5 or so months, I've been working with a M8, loaded with a bootloader. Now this works fine as the programmer cost me next to nothing to...
Tuesday, 10 June 2008 - 21:32
if if if vs if else if else if
Hey Guys i would like to know which one is better way of writing code if(xxxx) {} if(xxxx) {} if(xxxx) {} or if(xxxx) {} else if(xxxx) {} else if(xxxx) {} else(xxxx) {}...
Thursday, 29 May 2008 - 21:17

Pages