Post Created date
What Linux tools to use?
I edit with Kate, I program with AVRdude.
Thursday, 29 May 2008 - 04:42
Where is this smoke coming from? No... seriously
Update: Ok, I'm prepared for the flaming that's sure to follow this post. So I'm using a ghetto power supply that I made by converting an ATX psu. I figured this would be just...
Thursday, 29 May 2008 - 03:05
Looking for a simple piece of C code to flash LEDs
You should check out Part One of the Newbie's Guide to AVR Timers in the tutorials forum: This, coupled with the "Programming 101" tutorial...
Tuesday, 27 May 2008 - 06:10
Dragon, HVSP, AVR Studio and ATmega168 wrong signature
I have had the same problem with the signature being wrong while using HVPP. Most importantly: Check that you have the appropriate power connections for the chip, check that you...
Monday, 26 May 2008 - 19:07
I have the Need to Learn
microcarl wrote:Also check out: I agree with Carl. Start with the "Programming 101" tutorial and...
Monday, 26 May 2008 - 18:43
I2C temp sensor reading several degrees low
Now that I've done one smd chip I'd like to do more of that. Saves me from drilling the holes. I've got a dremel drill press and a set of very fine carbide bits but it's time...
Monday, 26 May 2008 - 03:30
I2C temp sensor reading several degrees low
DocJC wrote:That said, C isn't my language, but: Did you put the specified bypass capacitor across the SE95's power supply pins, as close to the chip as possible? If not, tack...
Monday, 26 May 2008 - 02:11
I2C temp sensor reading several degrees low
SteveN wrote:I can't help you with any potential code problems but I can't help wonder what sort of device you are comparing the SE95 against (your "gold" standard so to speak)?...
Sunday, 25 May 2008 - 23:47
Ribbon Cable - What is the max current?
Thanks folks. I appreciate your research time Carl, as well as the explaination!
Friday, 23 May 2008 - 00:41
LED Driver: HEF4794B -- how much can it source?
Kartman wrote:ps. you apply current to the base of a transistor to turn it on. Yes, with an NPN transistor. But with a PNP transistor don't you apply current to the base to turn...
Thursday, 22 May 2008 - 04:09
LED Driver: HEF4794B -- how much can it source?
Ok... still trying to work with what I have here. If I flip all of my LEDs around so that I'm sinking the current with the LED driver I just have to replace the transistor I was...
Thursday, 22 May 2008 - 01:07
LED Driver: HEF4794B -- how much can it source?
Well crap, I put in the order for that driver yesterday. Guess I'll have to make another order. Thanks for the help all!
Wednesday, 21 May 2008 - 20:38