Post Created date
Baud vs bits/sec?
Steve, I don't think your explanation is correct. I believe Clancy's description of baud is accurate. As Clancy states, baud is the symbol changes per second. It has nothing to...
Saturday, 2 February 2008 - 19:31
Charge Pump
To me, it seems it would be easier to just put the LED's in parallel instead of in series. I have controlled 30 LED's from one port before by just putting them all in parallel....
Saturday, 2 February 2008 - 18:49
Mega16 -> Mega128 Parallel Connection Voltage Drop
PD1 on the ATmega128 is also used for the TWI. Are you sure you have not enabled the TWI?
Saturday, 2 February 2008 - 18:40
Baud vs bits/sec?
initialx wrote:It would be great if you could point out the reason beyond the speed differece if i send a packet or a byte. At 115.2k, it takes about 87 us to send one byte. If...
Saturday, 2 February 2008 - 18:30
Baud vs bits/sec?
The way I understand it, for a simple UART, baud rate and bit rate are equivalent. Baud rate is symbols per second. For a UART, there are two symbols, high or low, which each...
Saturday, 2 February 2008 - 16:39
AVR - can it be programmed to output clocks for CD AUDIO
Of course, if you used a timer interrupt firing every 8 cycles, there would be no cycles left to do anything else. Even sp1nm0nkey's example as is would probably take more than 8...
Saturday, 2 February 2008 - 01:17
AVR - can it be programmed to output clocks for CD AUDIO
glitch wrote:LOL, that's where this whole thing started. The point was there is no reason to waste an AVR doing htis, if that is all it is doing. I agree. But if villekille...
Friday, 1 February 2008 - 23:33
how do you pull the chip off a STK500?
Personally, I have found when using those simple tweezer like IC pullers, I am MORE likely to bend the pins significantly. I prefer the small screwdriver approach alternating...
Friday, 1 February 2008 - 22:49
AVR - can it be programmed to output clocks for CD AUDIO
You could use the PWMs of an AVR to generate the divided clocks.
Friday, 1 February 2008 - 22:43
Inlined Delay Algorithm
Cool... I noticed the _NOP2 function is implemented as "rjmp 1". I will have to remember that the next time I need two NOPs. The lpm for _NOP3 is also an interesting idea....
Tuesday, 29 January 2008 - 03:59
MEGA168 signature 0xFF,0xFF,0xFF after debugwire session
The errata in the ATmega8 datasheet has the following on page 296: Quote:3. Signature may be Erased in Serial Programming Mode If the signature bytes are read before a chiperase...
Tuesday, 22 January 2008 - 02:32
MEGA168 signature 0xFF,0xFF,0xFF after debugwire session
I have seen something similar happen on an ATmega48, except it was not after a debug wire session but after reprogramming via ISP mode. Similar to what you are seeing, the...
Tuesday, 22 January 2008 - 02:00

Pages