Post Created date
ATmega32 PINA value.
Thank you very much  guys.
Friday, 29 March 2019 - 16:02
ATmega32 PINA value.
Thanks Clawson, I know the use of pull up resistor, I will ask the question in another way, when I use "if statement" I will need as an example: if (PINA.0==0) // else if (PINA.0...
Thursday, 28 March 2019 - 11:20
IR reciever reading
Hello you may need this table to migrate from at90xxxx to ATmega xx include both IR.h and IR.c in your main.c and the most important thing is the Remote Controller. Regards
Wednesday, 13 July 2011 - 22:52
IR reciever reading
I have this code for RC5 Reciever with codevision, but it has many compiling errors, maybe you can work with it if you had time.
Wednesday, 13 July 2011 - 09:02
a little of your time please....
Sunday, 22 March 2009 - 22:57
Hello... first of all thanks David.. Quote: Studio4 / STK500 can set the voltages on the STK500 board. You can either power your board via the STK500 ISP cable OR separately. You...
Sunday, 22 March 2009 - 12:32
I think my topic and me are blacklisted here , so I post a new topic : STK500 Problem
Monday, 16 March 2009 - 08:57
Help please...
Monday, 16 March 2009 - 08:23
Hi.. Using AVR Studio,the voltage measured for the target uC is less than 3.1V despite that the measured value by voltmeter is 4.6V... Is there any solution?
Monday, 16 March 2009 - 01:32
thanks for reply.. you mean this is the programming frequency? there is a 12Mhz Crystal on the board of the programmer, and this crystal can be used as an external Clock source...
Sunday, 15 March 2009 - 16:47
12v 10A powr supply circuit..
Hi again I could find this circuit , but how to make it gives variable voltage??
Sunday, 1 March 2009 - 12:49
MC33192 with stepper motor..
OK , You're super in expectation ,I'll try again.. you deserve the beer thanks for giving time....
Monday, 23 February 2009 - 00:16