Type in the full discussion title or a part of it.
Discussion Title Created date
Xmega Assembly Code Instructions in Hex
This is probably a newbie question, but I could use a pointer in the right direction. I generally program in Bascom and ZBasic, not C or Assembly. That said, I would like to look...
Saturday, 13 April 2013 - 00:55
Xmega Interrupt Vector Table?
Usually the compiler handles all of the details and life is good. Presently, however, I am trying to understand the Interrupt Vector Table for the Xmegas. I am familar with Table...
Monday, 25 February 2013 - 22:03
PDI Interface Change with "New" Xmegas?
Has anyone seen an App Note on migrating from the original Xmegas to the New & Improved Xmegas, (The ones with the USB modules and the improved ADC)? I've looked, but perhaps...
Thursday, 20 December 2012 - 19:00
Xmega DTMF Detector, Weekend Project
DTMF Detection with an 8-Bitter. Well, the gauntlet was cast down, suggesting that an 8-Bitter wasn't up to the task of DTMF detection, in this Thread . DTMF (Dual Tone Multi...
Monday, 17 December 2012 - 03:17
Who am I, Chip ID: 4E 96 1E ?
Who am I, Chip ID: 4E 96 1E ? If I just missed it then I'll get some more sleep, or some more caffeine, and re-read the appropriate section(s)... It would appear to me, however...
Sunday, 20 May 2012 - 16:06
Xmega Development Boards
It is easy to drop a DIP Mega in a breadboard and be up and running in a matter of minutes. Not so with the Xmegas, which don't come in DIP packages. This is a list of several...
Saturday, 7 April 2012 - 17:44
Overview of Xmega Lineup Document ?
Overview of Xmega Lineup Document? I assume it exists, I just can seem to find it... I looking on the Atmel site for a single document which describes the entire Xmega Lineup, and...
Wednesday, 28 March 2012 - 02:33
Xmega32A4 Runs program, but now won't connect to programmer
Any suggestions welcomed! I have a couple of Xmega32A4 testbeds, with a GLCD and some push buttons. They are not my PCB. They are well designed, have the appropriate by-pass...
Sunday, 25 March 2012 - 20:53
Overclocked Xmega Octo-copter
This DIY Drones Site by Sergiu demonstrates a number of his 3,4, 6, and 8 rotor helicopters. He uses anywhere from 1 to many overclocked (40MHz) Xmegas for the autopilot and...
Tuesday, 14 February 2012 - 02:10
FTDI USB to USART at 115200 ? <Solved>
I would like to run a FTDI FT232RL USB-to-USART chip at 115,200 Baud. I can successfully run the data link at 9600, 38400, and 57600 baud; but 115200 baud is failing. When I set...
Friday, 6 January 2012 - 16:48
Bascom Using the Bootloader Flash for Program Memory
I did not find a thread on this, or a discussion in the manual. If I overlooked it, I apologize, and perhaps someone could point me to it. I have a program which has filled a...
Thursday, 4 August 2011 - 14:46
NVM Write Lock Bits fails
The Xmegas are a great series of chips, but they still have some rough points... The Errata notes that there are several NVM Controller instructions which are not operational, (...
Monday, 16 May 2011 - 13:45

Pages