Post Created date
need a bit of help converting a make file.
Cool, that was the line I suspected. Thx so much i'll try it out soon.
Wednesday, 13 August 2008 - 16:40
atmega 16pu coudl it be locked?
Install avr studio's new version and it fixed it..
Tuesday, 15 July 2008 - 20:42
atmega 16pu coudl it be locked?
Is this the same as the erase feature it reports during writing? If so then what could be wrong its its not locked? AVR-studio log, Quote: Reading FLASH input file.. OK Setting...
Friday, 11 July 2008 - 00:13
selecting the external high frequency crystal
Ok, that was quite informational. The last guy on here a few months a go didn know what was meant my low and high bytes, I'm so thankful of your post. ok so according to my...
Saturday, 26 January 2008 - 16:42
selecting the external high frequency crystal
Thx for the reply, I don't see how to move a topic. Unless you mean to repost it there? Just to answer the questions. Quote:Which AVR chip are you using? There are differences in...
Saturday, 26 January 2008 - 05:08
avr-studio new to this help need some help
I may have pasted thw wrong text in there I meant Getting oscillator parameters.. P=0x01, N=0x00, SD=0x01 .. OK at any rate I just made another circuit on a bread board and all...
Saturday, 22 December 2007 - 02:17
avr-studio new to this help need some help
Connections are ok, any though on the above? Also what would one expect when pluging in the usb/isp in the a usb port? Since there is no firmware written would it show unknown...
Saturday, 22 December 2007 - 00:08
avr-studio new to this help need some help
digitool, no I have not. I only used the stk500. But my kit that came with my avr usb adapter said to. Since I can only make a connection when the avr usb adapter us connected I...
Thursday, 20 December 2007 - 19:50
avr-studio new to this help need some help
ok ,ill double check the wring. and try again. Yes there is 5v and a good ground, on the right pins. I believe I have sp2.
Thursday, 20 December 2007 - 13:59
avr-studio new to this help need some help
Quote:Do you have the correct chip selected in the program tab? - Well I dont have atmega8-16p as an option so I'm assuming its just atmega8 Quote:Able to read the voltage in the...
Thursday, 20 December 2007 - 05:22
avr-studio new to this help need some help
thx js , Quote:>>IF<< the programmer you are using is truly 100% compatible with the STK500, then select it as the programmer you want to use from Tools>Program avr>connect...
Wednesday, 19 December 2007 - 23:00

Pages