Type in the full discussion title or a part of it.
Discussion Title Created date
mass production/how to burn many chips?
I'm working with a company that is going to be producing a board with programmed chips in the order of 25,000 units.  The chip has a boot loader and the boot loader flash the...
Wednesday, 10 September 2014 - 17:37
can't get stk-500 to burn fuses in high voltage mode.
I have been programming with an avr usb burner for quite some time. I just recently got the stk-500 to do some high level burning. I was able to use the skt-500 in low voltage...
Friday, 18 July 2014 - 22:29
switching between two sets of firmware.
Going to guess this has been done before so I'm wondering how to do it? I have an atmega328 chip that has usb firmware on it (usb-v), a boot loader, and my code. The usb-v code is...
Monday, 23 June 2014 - 16:27
converting 8 bits to 16bits and divi up the bits.
I wan't to convert a char of 8 bits to a short so that I get a total of -32767 to 32767. Basically stretching it. If i just simply shift by 8 I get 0xff00, not 0xffff as expected...
Saturday, 21 June 2014 - 20:29
Firmware Only USB full speed Driver
I use a project called v-usb with my atmega8 series chips. It's a nice driver and has served me well. The speed limitation has become a bit of a burden. So I'm looking for a...
Thursday, 19 June 2014 - 12:25
"cannot find one or more components"
Ok I have tried every recommendation I can fine. I have a fresh install of win7 I tried many version of avr studio and all of them give me this error during install (completes...
Tuesday, 3 June 2014 - 20:13
An erronous checksum was detected
Looks like myself and a few none English forums have report this error so I imagine its not related to my issue but here is hopping. Error: Timestamp: 2014-05-31 00:33:39.253...
Saturday, 31 May 2014 - 04:49
builder errors on avr studio 6.1
I have been using 6.0 for a while now and upgraded to 6.1 sp2. I' getting all kinds of errors I have not had before. Warning 1 "/*" within comment [-Wcomment] S:\blissbox\...
Friday, 14 March 2014 - 02:43
flash stays on chip untill power is reset.
I have been trying to figure this out all day to the point I'm seeing bits floating around me. In the simplest terms I flash my chips with a boot loader. Then use a boot flash...
Friday, 14 March 2014 - 00:00
avrs when nuts on me?
when I open my project I get this error Flavour WinAVR does not exist. Please refer Atmel Studio documentation to know about Flavour My searches have been futile. I tried a repair...
Monday, 20 January 2014 - 21:32
airbag cut off switch.
I have one of those rare cars so its not something you can buy off counter stuff for. It has dual airbags but no cut off for my son to ride. Bummer... So I looked in to the...
Friday, 30 August 2013 - 14:46
nes zapper
I was brain storming an idea and wanted to see what some others may suggest? this zapper is an old toy used on the old Nintendo systems. I have thought about using it on a...
Tuesday, 20 August 2013 - 17:55

Pages