Post Created date
stm32 host cdc
awneil wrote:It is now on the ST forum:Good, time to nuke the thread!
Monday, 12 March 2018 - 09:23
emulated eeprom --new mode or same old?
jgmdesign wrote:...Wonder what "HEF" stands for.High Endurance Flash
Monday, 12 March 2018 - 04:38
Confusion on SPI (split)
js wrote: If miladsh52 is not getting notifications about the replies here, as I suspect, then the answers my friends are blowing in the wind....hmmm that could make a catchy tune...
Monday, 12 March 2018 - 04:23
Latest AVR-Toolchain (Linux)
Just as an FYI, Linux aside, the latest toolchain in Atmel Studio 7 is the Atmel AVR 8-bit GNU Toolchain (3.6.1.1750) also GCC: 5.4.0  
Monday, 12 March 2018 - 00:29
Confusion on SPI (split)
miladsh52, did david.prentice's post #10 above not answer your question clearly enough?
Sunday, 11 March 2018 - 23:03
Confusion on SPI (split)
To keep the continuity of the information going in this thread I am posting what miladsh52 posted in his Cannot read from PN532 RFID thread there as that thread is now locked as...
Sunday, 11 March 2018 - 23:00
Cannot read from PN532 RFID
This is a duplicate thread!   Okay miladsh52, first you posted to an old thread and a new thread was created for you to continue the conversation there, and now you have...
Sunday, 11 March 2018 - 19:24
UC3C CAN-bus Support Bidirectional Comms On Same Channel?
kepica wrote:it is quite OLD post ... nevertheless it has to be answered !I do envy your conviction, but sometimes it is better to leave the dead sleeping.
Sunday, 11 March 2018 - 17:33
Confusion on SPI (split)
Oh, look there, another thread started by the OP!  https://www.avrfreaks.net/forum/cannot-read-pn532-rfid
Sunday, 11 March 2018 - 17:25
Confusion on SPI (split)
@miladsh52, did you read post #20 in that other thread?  Please don't reply there, reply only here.   Codedawg wrote:I figured out a hacked solution to this --- I shift...
Sunday, 11 March 2018 - 04:46
ATmega32a not behaving same as simulation
The development board chip is running at 1MHz not 8MHz.  You need to re-program the fuses to make the chip run at 8MHz.   EDIT: The ATmega32A chip does not appear to...
Sunday, 11 March 2018 - 04:26
Mocking assembler instruction
Talking about cmocka here:   cmocka is ... an elegant unit testing framework for C with support for mock objects. It only requires the standard C library, works on a range of...
Sunday, 11 March 2018 - 04:20

Pages