Post Created date
Programming the Atmega4809
rammon wrote: Do you know how can I use my Atmel-ICE to do 12V UPDI programming?   No, I don't, but I would expect it to be able to insert a 12V pulse on the reset pin. At...
Tuesday, 13 March 2018 - 07:34
Programming the Atmega4809
EDIT: So my answers here were for the new tinyAVR-1 series and are not representative about the new megaAVR-0 series chips.  Please excuse the chatter, especially anything to...
Tuesday, 13 March 2018 - 07:07
Split from: Atsha204a
Thanks for the explanation Tony.  It seems Harish has asked this question before.  https://community.atmel.com/forum/atsha204a  Another bout of going in circles...
Tuesday, 13 March 2018 - 06:53
Split from: Atsha204a
anha6317 wrote:It makes no difference that it's an evaluation kit. Once you lock a zone in the chip it can never be unlocked. Tony, are you sure that a full erase of the chip and...
Tuesday, 13 March 2018 - 06:04
Programming the Atmega4809
Simonetta wrote: However, it has one primal disadvantage that has afflicted the embedded-systems industry since the 1970s: it requires a very expensive programming device made...
Tuesday, 13 March 2018 - 05:02
ATMega328P Xplained Mini No Longer Recognized
johnyradio wrote:Is this board just gone bad? No, probably not bad.  You probably deleted the driver accidentally.   Follow these steps:   Disconnect the ...
Tuesday, 13 March 2018 - 04:12
blink times about double
@johnyradio, tell us where you are located and someone close to you may be able to help rescue your board for you.
Tuesday, 13 March 2018 - 03:56
blink times about double
theusch wrote: [I swear that the first time I looked at the github program there was a PINB write in it...]Not the GitHub version.   In post #8 I gave him a fully working...
Tuesday, 13 March 2018 - 02:14
EEPROM and ATTiny816
Learn something new every day!   Kabasan, Mike, David, and Larry,  there is absolutely no need whatsoever to worry about interrupts while performing a CCP operation!...
Monday, 12 March 2018 - 18:40
Problem in flashing ATMEGA32a with USBasp
Awwsomeim wrote:Yes. I needed to change the fuses in order to change the clock source from internal 1mhz to external 8mhz. What exact fuse values did you use?
Monday, 12 March 2018 - 16:08
EEPROM and ATTiny816
MikeRD03 wrote:I see a lot of interrupt handling in your code. I tested it without all this and it works. Is it necessary for correct function? FULL BLOWN EDIT: See post #8 for...
Monday, 12 March 2018 - 09:56
What does Atmel now Microchip have for 32 bit?
awneil wrote:...we just seem to be going round in circles repeating stuff now ?Some kind of road block I guess.
Monday, 12 March 2018 - 09:33

Pages