D20 USART interrupt maaply wrote:...I need something simple configuration to trigger UART Rx interrupt for each byte. I understand now, that is not that simple like AVR8.ARM Cortex-M0+ are very...
Thursday, 15 March 2018 - 04:57
Need Help Using the ATTiny104 Xplained Nano on a Mac CaseyB, The programming interface to this device is TPI, and as stated by je_rudd in post #9
je_ruud wrote:
I did a quick look, and it seems TPI support is missing for all Atmel/...
Thursday, 15 March 2018 - 01:55
D20 USART interrupt maaply wrote:Thanksfor yours code. I was struggling on uart initialize, clock setting.... Si could you please give your USART initialization code? Sorry to ask your code.
That you...
Thursday, 15 March 2018 - 00:24
Impossible Graphics Power from an ATiny85! AtomicZombie wrote:I have ordered a few Tiny1614's, That is great news! I look forward to reading about your progress with this chip.
Wednesday, 14 March 2018 - 22:42
Need Help Using the ATTiny104 Xplained Nano on a Mac je_ruud wrote:
I did a quick look, and it seems TPI support is missing for all Atmel/Microchip tools, so that needs to be added. When that is done there will probably be a new...
Wednesday, 14 March 2018 - 21:13
ATMega328P Xplained Mini No Longer Recognized johnyradio wrote:Update 3: Xplained board still not recognized by Device Manager or AS. Next, i'll try re-install...Very good idea.
If you have problems after that we...
Wednesday, 14 March 2018 - 20:48
Need Help Using the ATTiny104 Xplained Nano on a Mac Thanks for answering.
je_ruud wrote:...First of all, you probably need to add support for ATtiny104, unless you've already done that. I haven't tested it myself, but you should...
Need Help Using the ATTiny104 Xplained Nano on a Mac Welcome to AVRFreaks!
Not sure if I can answer your question, don't have a Mac, but if you post a link to the avrdude.conf file I will try to figure out the avrdude stuff...
Wednesday, 14 March 2018 - 05:04
blink times about double johnyradio wrote:...Now my desire is to determine the clock rate.
larryvc wrote:
If he would have taken the time to try that code he probably wouldn't be in...
Wednesday, 14 March 2018 - 04:38
AS Code Edit Window Details Puzzled AND/OR Annoyed Thanks David, note that the dark red blocks are Break Points while the bright red blocks on the right edge of the scrollbar are misspellings. Also, I don't have the Naggy...
maaply wrote:...I need something simple configuration to trigger UART Rx interrupt for each byte. I understand now, that is not that simple like AVR8.ARM Cortex-M0+ are very...
CaseyB, The programming interface to this device is TPI, and as stated by je_rudd in post #9 je_ruud wrote: I did a quick look, and it seems TPI support is missing for all Atmel/...
maaply wrote:Thanksfor yours code. I was struggling on uart initialize, clock setting.... Si could you please give your USART initialization code? Sorry to ask your code. That you...
AtomicZombie wrote:I have ordered a few Tiny1614's, That is great news! I look forward to reading about your progress with this chip.
je_ruud wrote: I did a quick look, and it seems TPI support is missing for all Atmel/Microchip tools, so that needs to be added. When that is done there will probably be a new...
johnyradio wrote:Update 3: Xplained board still not recognized by Device Manager or AS. Next, i'll try re-install...Very good idea. If you have problems after that we...
Thanks for answering. je_ruud wrote:...First of all, you probably need to add support for ATtiny104, unless you've already done that. I haven't tested it myself, but you should...
Perhaps je_ruud might have some insight regarding this.
Who-me wrote:Why do you need avrdude ?...I'm not a Mac user, do you know that the Debug bridge Device works with a Mac?
Welcome to AVRFreaks! Not sure if I can answer your question, don't have a Mac, but if you post a link to the avrdude.conf file I will try to figure out the avrdude stuff...
johnyradio wrote:...Now my desire is to determine the clock rate. larryvc wrote: If he would have taken the time to try that code he probably wouldn't be in...
Thanks David, note that the dark red blocks are Break Points while the bright red blocks on the right edge of the scrollbar are misspellings. Also, I don't have the Naggy...
Pages