Type in the full discussion title or a part of it.
Discussion Title Created date
Inspection Microscope advice
Hi All   I am thinking about investing in HD Microscope for PCB inspection and debugging an soldering issues.   I have been recommended  Evo Cam 2...
Tuesday, 24 August 2021 - 09:38
SAMD21J18A bootloader advice
Hi All   I have my setup which includes the WINC3400 with the SAMD21J18A.   I have created a project, which simple downloads a block of data, splits it up into smaller...
Tuesday, 10 August 2021 - 09:20
Printf output, with buffer with a value of 0?
Hi All   I am working on a ASF example project, where the UART is outputted using the USB using Printf  e.g. printf("%s\r\n", (char *)pstrRecv->pu8Buffer);...
Saturday, 7 August 2021 - 15:02
SAMD21 Writing To unused part of the Flash?
Hi    I am using the ATSAMD21G18.   The Flash Memory is 256K.   I would like to implement some type of firmware update using a bootloader.   I would...
Friday, 23 July 2021 - 21:12
Triac Circuit Advice for Zero Crossing
Hi   I am planning to develop a PCB, which needs to control power (24V AC 2A(MAX) and 240V 5(MAX)).  The applicance will be 24VAC solenoids and 240V FANS/Motors....
Thursday, 15 July 2021 - 21:31
Additional GPIOS GPIO IC Vs AVR
Hi All   I need additional GPIO's to control various Relays etc.   My primary PCB has both UART and I2C output ports, therefore i can either connect any additional PCB...
Tuesday, 13 July 2021 - 13:49
PCB footprint options?
Hi All   I know this is a PCB questions,    I have always noticed that PCB footprints from libraries include multiple version for example, ATMEGA48-AU has a 32A_L,...
Sunday, 11 July 2021 - 11:17
Can Noise form a circuit , effect UART?
Hi All   I have moded a PCB, with some additional wires to a connectors and switches.   The main PCB has a UART connection to a RF module(AVR+RF),...
Monday, 28 June 2021 - 13:29
WINC3400 and paho MQTT
Hi All   Has anyone got the paho MQTT library used by WINC1500 successfully ported to the WINC3400?   I have managed to get it working till a certain point where i can...
Friday, 28 May 2021 - 18:08
SAMD21J18A, can not change PWM duty cycle dynamically on TC timer
Hi All   I am using the SAMD21J18A.   I have four PWM signals being outputted on PINS PB16,PB17,PA20,PA21, which are TC6 and TC7 output 0 and 1.   I can initially...
Friday, 28 May 2021 - 12:07
Purchase components directly from Microchip
Hi All Has anyone had any experience purchasing directly from Microchip.com I have orders some SAM devices, which are shown to be in stock but delivery has gone up to July. Any...
Wednesday, 19 May 2021 - 22:13
PCB pick and place machine and component wastage
Hi All   Does anyone operate any pick and place machine, with some experience with various types of reels and average wastage in components to expect?    
Thursday, 13 May 2021 - 17:27

Pages