ATMEGA164P Help! Beginner! gregsmithcts wrote:Quote:And by the way, ICSP is fscking Arduino slangWhat!?!?!?!?
Slang?Yep. Context matters.
By the way, I am no longer supposed to call it baby-talk, but if you...
Sunday, 20 February 2011 - 22:04
Interfacing temp Sensor&7segment display with Atmega8 Use real hardware instead of Proteus.
(Is there some Proteus virus outbreak at the moment? Fresh cracks on the torent networks? I think this is the third Proteus muppet for today).
Sunday, 20 February 2011 - 20:28
STK200/300 with AVRstudio 4 david.prentice wrote:Studio supports STK500v1, STK500v2 and JTAG ISP protocols.And Kanda provides an STK200/STK300 Studio plugin for their STK200/STK300.
Sunday, 20 February 2011 - 19:08
ATMEGA164P Help! Beginner! Read the schematic of your board.
J3 just stands for jack (connector) 3, and is just a board-specific reference, not having a general meaning, other than it being intended for a...
ATmega choice ! clawson wrote:As for 4 UART AVRs - you are basically looking at Xmega's to deliver that. (but then "ISP" becomes "PDI")And the ADC becomes a problem.
Friday, 18 February 2011 - 16:55
No luck with avrdude [using with Dragon] clawson wrote:
2) the PSU on the board (V1 only) has self destructed as documented on Nard's website.But in that case we should not see information like
Quote:
avrdude:...
Sunday, 13 February 2011 - 12:51
Using an AVR to emulate obsolete part. Without finding a datasheet for that thing, a quick ballpark estimate:
What is the clock frequency of that thing? Maybe 1 MHz? If you would use a 16 MHz AVR this gives you 16 AVR...
_delay_ms() not producing expected results clawson wrote:IMAO what Atmel should do is pull the link to "AVR Toolchain" on their "official looking" download site while they know it contains serious errors.
A responsible...
Thursday, 10 February 2011 - 21:47
CVAVR vs WinAVR? (for AVR-USB) sf2000 wrote:I c that 'mr. arnold the cop' is into doing dramas, anyway his words are certainly incorrect, so i'll ignore.Everyone can read that old thread from November, where...
Sunday, 6 February 2011 - 21:14
CVAVR vs WinAVR? (for AVR-USB) Dean,
from experience, there are customers not worth doing business with. Some customers just mean trouble. This guy is someone I wouldn't do business with, because he awfully...
gregsmithcts wrote:Quote:And by the way, ICSP is fscking Arduino slangWhat!?!?!?!? Slang?Yep. Context matters. By the way, I am no longer supposed to call it baby-talk, but if you...
Use real hardware instead of Proteus. (Is there some Proteus virus outbreak at the moment? Fresh cracks on the torent networks? I think this is the third Proteus muppet for today).
david.prentice wrote:Studio supports STK500v1, STK500v2 and JTAG ISP protocols.And Kanda provides an STK200/STK300 Studio plugin for their STK200/STK300.
Read the schematic of your board. J3 just stands for jack (connector) 3, and is just a board-specific reference, not having a general meaning, other than it being intended for a...
https://www.avrfreaks.net/index.p...
clawson wrote:As for 4 UART AVRs - you are basically looking at Xmega's to deliver that. (but then "ISP" becomes "PDI")And the ADC becomes a problem.
clawson wrote: 2) the PSU on the board (V1 only) has self destructed as documented on Nard's website.But in that case we should not see information like Quote: avrdude:...
Without finding a datasheet for that thing, a quick ballpark estimate: What is the clock frequency of that thing? Maybe 1 MHz? If you would use a 16 MHz AVR this gives you 16 AVR...
I have experienced Atmel as a company that hates to communicate. And when they communicate I can't trust them.
clawson wrote:IMAO what Atmel should do is pull the link to "AVR Toolchain" on their "official looking" download site while they know it contains serious errors. A responsible...
sf2000 wrote:I c that 'mr. arnold the cop' is into doing dramas, anyway his words are certainly incorrect, so i'll ignore.Everyone can read that old thread from November, where...
Dean, from experience, there are customers not worth doing business with. Some customers just mean trouble. This guy is someone I wouldn't do business with, because he awfully...
Pages