Post Created date
Small & Cheap JTAG Interfaceُ
XavierGr wrote:but others posted that it worked for them in that link. Yes, and in the same link yet others posted they couldn't make it work. Which is exactly the point people...
Thursday, 27 December 2007 - 20:43
Sample code for gLCD (240x128) w/ T6963 controller
Type "T6963" into Google. Lots of code and libraries, commercial and otherwise.
Wednesday, 26 December 2007 - 08:49
PolySwitch for an Ampermeter?
Don't do it. For principle, as well as for practical reasons. A fuse is a safety device. One never ever plays with, alters, or manipulates a safety device. Never. For practical...
Sunday, 23 December 2007 - 11:37
Help : LCD interfacing with ATmega32
kam123 wrote:I did not get any data sheet for the LCD, but the supplier told me that it is based on HD44780 controller. ... The only details found on the PCB for the LCD is TRULY...
Sunday, 23 December 2007 - 11:21
L1672 Datasheet
Seiko is a little bit strange. It looks as if they are trying very hard to forget past products. The good news is the L1672 is standard stuff. It uses a KS0066 controller (...
Saturday, 22 December 2007 - 20:38
Capacitor value for 32.768KHz for Atmega 164p
The 164P datasheet says the low frequency oscillator provides a build-in 8pF load capacitance. So you are in theory short of 4.5pF with your crystal. In practice the stray...
Saturday, 22 December 2007 - 12:09
compiling error
A file called hardware_settings.h is missing.
Saturday, 22 December 2007 - 08:07
atmega 16 output
You make it very hard to help you. It's like pulling teeth. What about providing some real information? Schematics? Code? PWM frequency? Lower than 5kHz? L239D supply voltages,...
Friday, 21 December 2007 - 16:38
Automatically Increment Build Version Number in Firmware
Buildnumber creation without a central database like a VCS is rather fragile. Consider using a timestamp instead. Here is a quick hack for generating one on Unix with make: # Do...
Wednesday, 19 December 2007 - 11:13
Newbee have some questions about Atmega 8
From a quick look at the g24-tec web site it looks as if the board requires an additional ISP programmer. You better contact g24-tec and ask them for details. Regarding Kubuntu,...
Sunday, 16 December 2007 - 00:43

Pages