Post Created date
V-USB Library , gcc plug-in: Error: Object file not found...
Did you try
Saturday, 25 December 2010 - 16:47
PCB fabrication Companies: My review
I have used 3 companies in the past: Olimex, EzPCB, and GoldPhoenix. Olimex sent me passable boards which were rather roughly sheared. The copper foil came off under too much heat...
Tuesday, 21 December 2010 - 08:07
U.S. Supplier of ATxmega128A3 Crumb Module
The only board I know of with the equivalent function is the Oak Micros omxa4 module.
Wednesday, 20 January 2010 - 02:57
Why? I have 2 STK500s but one is "fried", 1 STK600, 1 JTAG MKii rev A :(, a Dragon carefully locked in its lair, and 2 homemade programmers. I'm sure everyone has something...
Monday, 18 January 2010 - 06:59
mouse sensor
paragahsan wrote:I am new in using microcontroller. I want to interface an optical mouse sensor(OM02) to get position using the pin X1 and X2 of the sensor. I have ATmega8,...
Monday, 18 January 2010 - 06:56
at90usb162--maximum data rate achieved!!!!!!
msd wrote:I am trying to find out that 1ms tick...but it is written in the datasheet of usb162 that data rate of 12Mbit per second supported, so if that 1mS is included then how...
Monday, 18 January 2010 - 06:48
I need to select a C Compiler.
johnroshan wrote:I'm totally free to choose whatever I want. No quality audits on my compiler choice. I don't really require very fast compilers or small code size. I'm going to...
Friday, 15 January 2010 - 04:22
RS485 auto config!
DIP switches are the usual method but there are definitely some software protocols that could be used. First of all a slave needs to be able to do collision detection and then...
Monday, 11 January 2010 - 03:16
QTouch XPlained Demos?
Dean, I admire you work and you are worth more than just simple quips. I tried to do some research. As you have probably found the QTouch library readme says that it supports...
Monday, 4 January 2010 - 07:25
Programming the atmega128rfa1
Let's at least try to be a little more helpful to a newbie. If you check the Atmel site you will find the atmega128rfa1 listed as a wireless device. Unfortunately it is not yet...
Monday, 4 January 2010 - 00:50
On the lookout for AVR with 4 16-bit output compare regs!
jonathan_w wrote:Does it come in any package that isn't surface mounted? I could not find any :/If you want a more complete package that is breadboardable then you could try the...
Sunday, 3 January 2010 - 17:08
xmega A4 development board
I have built and tested the omxa4 - everything works as expected. I have a limited quantity available now without a bootloader - just click on the picture to order. I will make...
Friday, 1 January 2010 - 21:17