Post Created date
AvrFlash Freeware frontend for STK500/AVRISP programmer.
Nice discussion! I would say "RTFM", see first post: Quote:To set the development mode: make a shortcut with commandline parameter: 'Develop'. So default the setting of dangerous...
Saturday, 8 November 2008 - 16:41
AvrFlash Freeware frontend for STK500/AVRISP programmer.
Sorry, never noticed that it did not remember the port, always used it on USB. I corrected it in 2.01 Jonh ,the fuses: did you try setting the fuses? I have done my best to make...
Thursday, 6 November 2008 - 20:19
AvrFlash Freeware frontend for STK500/AVRISP programmer.
New version, with bootloader and eeprom support Dig
Wednesday, 5 November 2008 - 19:51
Need help with USB HID implementation
Hi David Here is my working code. Dig
Thursday, 22 May 2008 - 22:58
RE: Re: RE: WinAVR 20071221 Released
Ok, I have done that. Sorry for posting to the announcement thread. Dig
Wednesday, 16 January 2008 - 08:58
Solved avr/bin/ld.exe: : No such file: No such file or ..
My problem is solved by using a new MFile generated makefile. Don't know what caused it. Dig
Tuesday, 15 January 2008 - 13:10
got a strange error after installing new WINAVR20071221
Hi all I have the same problem, spent 2-3-4 hours in and uninstalling; win XP I always install the latest version in c:\program files\WinAVR renamed dir WinAVR to WinAVRold Path...
Thursday, 10 January 2008 - 13:26
"JTAGICE mkII IDR event 0xff" error
Reading the ADC with devices that share the ADC inputs with the jtag causes this error Dig
Friday, 28 September 2007 - 10:16
Reading an NTC Thermistor via an Atmega32's adc pin
oversampling is free.... Dig
Monday, 23 April 2007 - 19:04
Measuring 0-200V using 1AD channel
Or use a avr with a Programmable Gain Amp like the mega 32. Place a Fet input opamp as voltage follower in front with a high voltage resistor of 1 - 10M in series and you are...
Monday, 23 April 2007 - 18:59
Reading an NTC Thermistor via an Atmega32's adc pin
The "sensitivity" is determined by the Betavalue, this is in the datasheet. With my NTC Bvalue = 3977 the resolution at lower temps using 10 bit ADC is lower than 1 degree, so you...
Monday, 23 April 2007 - 18:49
Reading an NTC Thermistor via an Atmega32's adc pin
Or let the controller do the work: #define RREF 10000 //10k NTC #define BVALUE 3977 // from datasheet // calculate NTC resistance , 1023 = 10 bits ADC 10000 = pullup value...
Sunday, 22 April 2007 - 20:10

Pages