Type in the full discussion title or a part of it.
Discussion Title Created date
TWI Slave code???
Can someone help me debug this code? I've used libraries(for master only) for the TWI/I2C before, but this is the first time making(or using)the slave code myself. It compiles...
Monday, 14 July 2008 - 01:18
Communcating Between Two AVR With I2C_Master
How might I communcating between two AVR with I2C_Master? I came up with code but it does work. The master chip's code I'm pretty sure works but I'm not sure the slave chip's code...
Wednesday, 4 June 2008 - 01:33
Internet for my AVR
Is there something that allows me to access to my avr over the internet?
Wednesday, 7 May 2008 - 07:57
Watch Transformers????
Does anyone know where to buy transformers(for the luminescent strip) that are in watches? I need a 1:100 bump up.
Wednesday, 2 April 2008 - 19:21
Wich LCD???
Using attiny2313 what would be the best(easiest to use, lots of tutorials and help, and cheap) serial LCD to start with, be?
Sunday, 30 March 2008 - 18:50
Coil Wire ????
I was make a coil with with 30 A.W.G or 33 S.W.G 10 times around a 15-cm circle at a freq. of 104 khz. How much more or less turns do I have to do if I only have 30 A.W.G wire?...
Friday, 28 March 2008 - 19:46
Can someone help me set up SPI connection(schematic and code) between two artiny2313? I've read the SPI setup app note but they don't really have any of the registers listed, and...
Friday, 28 March 2008 - 05:33
Real TIme Counter????
Is "Real TIme Counter" the same as "Real TIme Clock"? Can some one give me a list of what avrs have RTCs?
Thursday, 27 March 2008 - 20:53
Charging 7.4V 900mAh 15C Lithium Polymer Battery
How would I begin to make a charger for a 7.4V 900mAh 15C Lithium Polymer Battery from a wall source and/or solar panels?
Tuesday, 25 March 2008 - 19:57
How might I communicate to a I2C sensor using a attiny2313 or a atmega8?
Wednesday, 27 February 2008 - 04:39
Programming fuses with AVRDUDE?
How do you change attiny2313 fuses with avrdude. I know what fuses I need to change use the fuses calculator. I know you can really screw up your chip :x if you don't you this...
Friday, 1 February 2008 - 03:50
PWM to a Servo with a ATtiny2313
I've been trying to get a servo to work using PWM, but all the tutorials I've found on the google are based on the timers and not the PWM its self, and don't have allot of...
Friday, 18 January 2008 - 22:27