Type in the full discussion title or a part of it.
Discussion Title Created date
StartupCode for C++ ??
Hi.. i am looking for Startupcode for C++. The problem is that the famous crt0.x works only for C because it is not calling the constructors of the static object, like it is...
Wednesday, 2 December 2009 - 20:36
ToolchainUpdate -> Linker Error
Quote:c:/programme/atmel/avr tools/avr32 toolchain/bin/../lib/gcc/avr32/4.3.2/../../../../avr32/bin/ld.exe: section .sleepmem [0002e8ec -> 0002ecbf] overlaps section .bss [...
Monday, 30 November 2009 - 13:28
Using PICO @ AP7000 fails totally
Hi.. I have tried to use the PixelCoprocessor within the Ap7000. I can not even start with it. Every instruction related to the PICO causes the CPU to jump to an relativley low...
Wednesday, 26 August 2009 - 22:56
Alternative USB Clock (AP7000)
Hi :-) I have some questions about the USB-Clock-Generation. I do not have additional BoardArea for an additional crystal at OSC1. So i want to ask: ->GCLK5 is "Reserved for...
Friday, 14 August 2009 - 18:26
AP7000 Memory Problems
Hi. I have some problems with my AP7000-Board. Due to powersaving a want to enter a sleepmode. So i set the clocksource to OSC0 (16MHz) and set the CKSEL-Register to high division...
Wednesday, 8 July 2009 - 17:53
DMA Problem on AP7000
Hi.. I have set up a peripherial DMA-Cannel (USART2) to receive some bytes. It does not work well. The receive-counters tell me that the correct number ob bytes are received. My...
Thursday, 4 June 2009 - 02:16
Standalone Mass Storage Device on AP7000
Hi I am looking for Examplecode how to implement a MSD in my Standalone Application. Every framework i have downloaded yet includes Mass storage examples which are related to USB-...
Wednesday, 3 June 2009 - 20:18
Standalone MCI-Code?
Hi I am looking for Code for the MCI-Interface. I need to interface SD-(SDHC)-Cards. Currently I only need to initialize them and Read Blocks. I prefere the 4bit mode. Did someone...
Tuesday, 26 May 2009 - 22:51
UC3B0256 does not start after programming
Hi I have 2 UC3B0256 now and both have the same problem: After programming they do not start working. If they are programmed via DebugConfiguration in AVR32 Studio 2.1.1 they...
Monday, 20 April 2009 - 19:28
MobileRam PowerDown-Modes (Ap7k)
Hi.. I have some Mobilde SDRAM connected to my AP7000. It works fine, but now i need "low power". I have tried to put the ram into power down mode, but that didnt work so fine....
Sunday, 12 April 2009 - 12:19
NCS5 Problems (AP7k)
Hi I am working with the AP7k.. i have a self made tiny board for it with a LCD (parallel interface) connected to NSC5. The datasheet says that NCS5 is connected with adressed...
Wednesday, 8 April 2009 - 06:21
Using USB-DP-Ram for General Purposes?
Hi.. I have some problems with the limitted memories in the UC3B-devices. I need 31.5kb for my application.. and some bytes more... So i have questioned myself, if it is possible...
Wednesday, 1 April 2009 - 22:08

Pages