Type in the full discussion title or a part of it.
Discussion Title Created date
WinAVR avrdude & USB
In setting up a new computer system, I grabbed WinAVR 20100110, and installed. Then I installed my USBtiny drivers and libusb. To test, I loaded an existing project (which works...
Saturday, 16 January 2010 - 09:28
LM35 to ADC
I'm not very strong in analog stuff, and particularly not in RF, so I could use some advice. :D I'd like to tie the output of an LM35 to the ADC pin of an XBee module. The...
Friday, 15 August 2008 - 23:43
Ever had one of those moments?
One of those moments when you looked down, and knew that something HAD to be wrong? Then you look over everything, try to figure out what it could be, and finally come to an...
Tuesday, 24 June 2008 - 04:04
General ramblings after today's experimenting...
Today, I grabbed a thermistor and set about using one for the first time. I threw a mega8 in the old breadboard, powered by my modified ATX supply. I connected an LCD for a...
Friday, 28 December 2007 - 03:20
Help me choose a heating element...
With another baby due in February, I'd like to make a blanket/towel warmer. Something along the lines of a small cabinet with the heater in the bottom drawer, and air vents to...
Tuesday, 4 December 2007 - 23:01
Solar power & battery charging
One of the projects with which I have been tasked needs to run on solar power. The average power draw would be negligible. However, it would infrequently see brief periods (1-5...
Thursday, 8 November 2007 - 03:01
Driving FET gate
I've been doing something in testing and throw-away project which is, I know, bad - or at least incorrect. But it's been working really well, and I thought I'd get some feedback...
Friday, 19 October 2007 - 19:16
PWM problem with AtTiny25
Hello... I succesfully got PWM working on my AtMega8, by doing the following: Set DDB1,2,3 I set WGM10 and WGM12 for 8-fit fast PWM. I set COM1A1 and COM1B1 to set on match. I...
Saturday, 13 October 2007 - 02:42