Post Created date
Extra data in hex file??
Quote: I am of the opinion that there is a bug in the newer GCC and/or AVR Studio in the handling of .elf and .hex files if there is a bootloader section. Debugging info in the ....
Tuesday, 6 October 2009 - 13:06
AVR studio port stimuli
Oh yeah I wasn't having a go - simply saying that you probably don't want to waste too much of your precious time having an eight year old conversation. (or triggering other...
Tuesday, 6 October 2009 - 13:01
Creating a .txt file in AVR
I meant that if the AVR where you are running this code has a UART link to a PC then use printf()s via that to get a picture of what mmc.c and ff.c are "thinking" inside. (Cliff...
Tuesday, 6 October 2009 - 12:58
ATtiny85 Fuse Bits
Pump 1MHz into XTAL1 and do ISP again to repair the fuse damage. If nothing else a wiggled pin on another AVR will generate 1MHz
Tuesday, 6 October 2009 - 12:52
avrdude and Pl2303 USB->serial converter
You can't do bit-banged serial ISP with a USB-RS232. Time to consider a new programmer solution. Oh boy 'Freaks has a REAL problem - it's put this answer BEFORE the question below...
Monday, 15 September 2008 - 12:46
rabbit!
MSP430, PIC
Friday, 22 August 2008 - 17:58
Scrolling functions in 128x64 pixel graphics lcd.
Have you actually read the forum rules about what the acceptable form of communication here is? I doubt anyone is going to be willing to offer help to someone who can't even...
Thursday, 6 December 2007 - 12:37
Solid State Relay opearation with Atmega16
I'm intrigued by this thread - how on earth is it possible to reliably write software for a device for which one does not have a datasheet? If it's just a hobby project I guess it...
Monday, 15 October 2007 - 13:44
AVR Studio 4.13 service pack 1 beta
steve17 wrote:I've been ignoring the service pack because it's beta and they ain't paying me to do their testing. I have enough problems already. But now it's good? But it's no...
Saturday, 6 October 2007 - 20:27
AVR Universal Bootloader
You did READ the readme.html in the ZIP file didn't you? It explains all the configuration parameters and the author has even had the good sense to break them all out into an...
Saturday, 6 October 2007 - 20:19
USB programmer
ethanhayon2 wrote:http://www.jumpmanzero.com/k5/progq1.jpg is what im doing now, is there anyway that i can do this using a USB cable? Is there anyway that i can part out a USB...
Saturday, 6 October 2007 - 20:14
Working code Timer1 interrupt & debounce & timer del
richard@adam.com.au wrote:Australia is playing england in the rugby world cup Oh? How did that turn out? :lol:
Saturday, 6 October 2007 - 20:07

Pages