Post Created date
Number of Cycles for _divmodsi4
I did the same. An interesting result is when the divisor is 0. I expected a quick exit but it counted 720 cycles. Similarly a divisor of 1 gave 620 cycles. Perhaps the authors...
Monday, 19 May 2014 - 14:58
AS6 Output Files
You might use elf rather than hex if you want a single file containing code, eeprom, fuses, lock bits. Otherwise always use hex for code and eep file for eeprom.
Friday, 11 April 2014 - 15:56
Simple PWM
No sei() Cliff
Sunday, 17 February 2013 - 15:35
attiny87 versus attiny167
It's software compatible in the sense that you can take the same source file, just change the build target between 87 and 167 and rebuild. Given that this only takes a minute I...
Friday, 25 January 2013 - 16:46
how can i define a macro that combines pins from different ?
Your macro needs a parameter!
Tuesday, 17 July 2012 - 16:31
Arduino libraries with AT90USB
Note also that for the USB specific part you will probably use LUFA so you also have to bear in mind how other code will interface to that.
Tuesday, 17 July 2012 - 16:28
LCD not displaying character in ATMega16
Why not use the LCD code that came with your compiler simply to verify the electronics?
Tuesday, 17 July 2012 - 14:04
Atmega328 and LCD issues
I guess you missed Steve's comment above that avr-gcc already comes with working 4 bit LCD code?
Tuesday, 17 July 2012 - 14:01
How to make a library?
Even the "second or two of compilation time" really means one or two seconds the first time lcd.c is compiled to lcd.o because after that it's unlikely to change so won't be...
Tuesday, 17 July 2012 - 10:01
Char to graphic screen
I'd stick to fixed width fonts (think Courier on Windows or even the [code] font here). While proportional are do able by keeping widths with characters consider how complex...
Monday, 16 July 2012 - 16:18
at90usb162 internal flash question
If you use LUFA does that suggest you use avr-gcc? If so then look at boot.h and the BOOTLOADER_SECTION macro in particular, use with a - - section-start=.bootloader=0xNNNN in...
Monday, 16 July 2012 - 16:13
no way to compile code for atxmega256a3bu w/ avr-libc
Quote: Anyway, my issue is not with avr-gcc, but with avr-libc. As I said above (it was me, really) under GPL Atmel really should be publishing patches for the AVR-LibC they...
Wednesday, 18 April 2012 - 15:41

Pages