Post Created date
Timer/Counter0 Output Compare Match A ISR is not getting executed
The mistake is that you use < instead of << in the following line TCCR0B |= (1<CS00)|(1<CS01); //64 prescaler  Also make sure that you set OC0A pin as output...
Tuesday, 10 March 2015 - 09:52
Beginning EEPROM
Anklon wrote: what it mean by writing EEMEM last after variable name? It makes no difference if it in front or after the variable name, the effect is the same. Alex
Wednesday, 11 December 2013 - 18:34
[SOLVED] Atmega328 IO PORT Bit Access
dagon666 wrote:Hi guys, problem can be marked as solved. I had a timer output compare enabled on the same pin which was interfering with the OW bus. My bad. You can edit your...
Wednesday, 11 December 2013 - 09:27
Output voltage from avr pin
msj121 wrote: I am a little confused with the data sheet, which is technically the current draw How much current does the load of that regulator absorb? msj121 wrote: Otherwise I...
Tuesday, 10 December 2013 - 15:28
Output voltage from avr pin
Surely the best way it to add a transistor or even better a small logic level mosfet but maybe he can get away with a short between a couple of pins depending on the consumption...
Tuesday, 10 December 2013 - 09:03
Output voltage from avr pin
From what I can tell he is trying to feed a voltage regulator from an output pin of the mcu but didn't take into account how the voltage dips as soon as you start sourcing current...
Tuesday, 10 December 2013 - 07:41
using at mega 8
zryan_s wrote:if you have any idea for changing variable to string... What kind of variable? Alex
Monday, 9 December 2013 - 00:41
issues with pullup resistors and if statements 2313 [solved]
theycallmeshua wrote: so when would you call " PINBx " what do you mean by david.prentice wrote:PINB0 is a simple number. If you open the 2313 header you will see that what you...
Sunday, 8 December 2013 - 10:04
using at mega 8
These two posts have a description of the methodology you can use and https://www....
Sunday, 8 December 2013 - 00:18
Common abstract Driver for AVR, PIC, MSP430..
An arduino style compiler is your best bet I think , I have seen both AVR and pic boards that can be programmed with the same code Alex
Saturday, 7 December 2013 - 11:14
Probably a bit banging-101 question...
Well you never mentioned the model you were using so I based my reply on a mega8. So basically your question was which way of the two to use since the high bits will be 0 anyway...
Friday, 6 December 2013 - 23:22
Probably a bit banging-101 question...
You say you are aware of what your code does but since you use Vcc as ADC Vref bit 6 of ADMUX is 1 and will be cleared as soon as you execute the code as given in your second...
Friday, 6 December 2013 - 17:11