Post Created date
help AT93C56
Well for starters your CS-enable will pull the CS-pin low instead of high, unless you have some logic that will invert the signal. Your receive-routine should work when you fix...
Monday, 3 September 2007 - 10:51
Interfacing 2 MCU
Well for one example you could use the UART to communicate to both the MCUs at the same time, by connecting the RX and TX lines from both MCUs to the same source, and you will...
Friday, 24 August 2007 - 07:14
I beleive that what you are asking is why the EEPROM gets erased every time you download a new program to Flash? You can prevent the EEPROM to be erased during the chip erase by...
Thursday, 16 August 2007 - 10:52
Accessing an array in asm
Ah thank you Cliff, it worked. The code is part of a time critical ISR, and I would not want to write time critical parts that are dependent on compiler optimization to finish...
Wednesday, 15 August 2007 - 12:41
Accessing an array in asm
Well, maybe I was a little unclear about my question. What I want to do is this (in C): uint8_7 Buffer[64]; uint8_t *pCurrent; // the current position in the buffer, where data...
Wednesday, 15 August 2007 - 07:37
Error: relocation truncated to fit
You are correct, it is the limitation in the branch that causes the error. I'll edit my first post with this new information.
Tuesday, 31 July 2007 - 13:39