Type in the full discussion title or a part of it.
Discussion Title Created date
Pin configurations when sleeping
Hello I was thinking about how to set up the digital i/o pins when putting the AVR to sleep. If I have a peripheral connected to a few AVR pins, both inputs and outputs, and the...
Thursday, 15 July 2010 - 07:37
Digital clock signal to TOSC1
I'm about to connect an external 32kHz digital clock signal (not a 32kHz crystal) to TOSC1 for using Timer2 in Power Down mode. The data sheet for ATmega16 states this about the T...
Tuesday, 9 June 2009 - 08:11
Placing a string directly after the vectors in Flash
I would like to place a version string right after the vectors in my ATmega16. I'm using AVRStudio and WinAVR to build my project, and the version string is defined in version.c....
Friday, 20 March 2009 - 09:00
My ADC does not work!
Plz help! My ADC does not work!1!!!11 What is wrong??? :) So I have an ATmega16. I have set up the ADC as single conversion with interrupt enabled. The interrupt reads the value...
Monday, 2 March 2009 - 15:17
Accessing an array in asm
Hi I have a buffer that is allocated in C and a pointer to the current position in the buffer, also allocated in C. I want to set the pointer to the first address of the buffer in...
Tuesday, 14 August 2007 - 15:05
Initialize eeprom without overwriting first byte
So I have a structure with configuration information that I store in internal eeprom starting at address 0x01, and this structure has some initial values. The byte at address 0x00...
Thursday, 2 August 2007 - 08:06
Error: relocation truncated to fit
Just for the record. When I compile my project I get an error in the assembler file: relocation truncated to fit: R_AVR_7_PCREL against 'no symbol' I get the error in two...
Tuesday, 31 July 2007 - 08:20