Post Created date
LUFA and C and me and decrementing For loops (bug?)
It's "less than" 10 in the code that doesn't work. i is supposed to be counting down - Yet never gets there? I think your loop would execute once. S.
Friday, 11 March 2011 - 00:24
In-system programming daisychain?
Hi All. Quote: I wonder if you connected the output of the programmer to all devices but only had the return signal from one of them connected back whether that would work? So...
Wednesday, 28 April 2010 - 23:55
Port A and external clocks on tiny2313
Hi David, Yeah, you are correct in that trying it would have been simpler, but I managed to smoke my STK500 awhile back through incompatible power jumper settings. I was about to...
Friday, 19 February 2010 - 16:02
Port A and external clocks on tiny2313
PS - And I still can't find it mentioned under 'External Clock'. It's mentioned under 'Alternate Port Functions' again. S.
Friday, 19 February 2010 - 01:02
Port A and external clocks on tiny2313
Aha. It does say you can in the 2313 A (!) spec, but not in the 2313 'not A' spec... Can a 2313 NOT A do it? S.
Friday, 19 February 2010 - 00:59
Port A and external clocks on tiny2313
PS - In the original message, I meant 168. 163 is something else. S.
Friday, 19 February 2010 - 00:34
Port A and external clocks on tiny2313
Koshchi wrote:Quote:I have to use an external clock because the internal one isn't fast enough (I'm running very close to 20MHz) and I wanted to use PA1 as generic I/O. Does that...
Friday, 19 February 2010 - 00:31
Port A and external clocks on tiny2313
Hi David. Close, but not quite what I wanted. I have to use an external clock because the internal one isn't fast enough (I'm running very close to 20MHz) and I wanted to use PA1...
Wednesday, 17 February 2010 - 11:37
PWM, servo and jitter
PS - The real problem was that the servo pulse itself wasn't stable in length for a constant-width command with a flaky clock speed. The arm wobbled. With a crystal, suddenly it...
Wednesday, 21 October 2009 - 07:39
PWM, servo and jitter
Hi Folks, What I was doing was making my own control board for a LynxMotion arm. It works, and involves lots more funky control algorithms (think reverse kinematics done in the...
Wednesday, 21 October 2009 - 07:33
PWM, servo and jitter
Searching for PWM Jitter on the forums found me this antique thread (2005!), but didn't solve my problem. I had a nice snappy little interrupt routine (all it did was toggle a...
Tuesday, 27 May 2008 - 02:36
Convincing Studio 4 to program an old chip
Hm. Okay, I'll try both those, looking for the XML and trying out 'avrdude'. Thanks for your input, Scroungre
Saturday, 9 February 2008 - 12:27

Pages