Type in the full discussion title or a part of it.
Discussion Title Created date
Bootloader for atTiny85
Hi, can someone recommend a small serial bootloader for the attiny85? I just need something small, that doesn't have lots of features. I don't even need a read function. Just...
Monday, 2 September 2013 - 21:43
WinAVR and tiny10
I need something that supports a tiny10 and C. It looks like WinAVR has stopped being updated. AVRStudio 4 only supports assembly for this and I need C. AVRStudio 5 supports C...
Monday, 7 November 2011 - 16:03
Delay_x in Studio 5
Hi I'm trying to use the delay_x.h routine in Studio 5 with an attiny10. It gives me an error at line 190 and 220. Line 190 is the "asm volatile" line below. I'm not any good...
Monday, 7 November 2011 - 04:50
In-Circuit Programming Hookup
Hi, I have a ATTiny10 and an ISP programmer. So far I can program the chip. The datasheet says that when I hook it up to the rest of my circuit, I should put some series...
Thursday, 3 November 2011 - 17:34
Tiny Programming Port On Small Board
I want to put a Tiny10 on a small board, but I want to be able to program it on the board. I see the circuit in the datasheet for doing this. I'd like to find a way of putting...
Monday, 31 October 2011 - 18:16
Wav file frequency
Hi, I'm trying to play a short 10-30 second sound clip on an AVR through the PWM pin. I have some old Mega8L's laying around, so I thought I'd use one for this project. I'll be...
Tuesday, 8 December 2009 - 02:34
Mega48 Serial
Hi, I've been trying to get my robot communicating over serial all day today, but am stumped. Can someone look at my program and tell me where I went wrong? I'm using a Mega48 on...
Thursday, 12 November 2009 - 06:39
Mega168V and voltage
Hi, I've looked at the datasheet for the 168 and can't find the info I'm looking for. I'm powering a 168V with 2.4V. The datasheet shows that it can be powered by 1.8-5.5V if...
Monday, 28 September 2009 - 04:00
To Solder or to socket
Hi all, I'm building a circuit on one of those perfboards that has copper traces on it.(http://wpcontent.answers.com/wik...) I will have a programming port on the board. I'm...
Friday, 25 September 2009 - 16:43
Low Voltage Serial
Hi All. I'm trying to communicate with me PC using a Mega168 running at 2.4V. How can I hookup the RxTx pins so that I can hookup to a PC? I've done it before using 5V and a...
Friday, 25 September 2009 - 03:41
ADC and Vref
Quick question. If I want to use the internal vref of an avr, does my internal reference voltage have to be lower or equal to the vref? I noticed that the mega168 has a 1.1vref...
Monday, 21 September 2009 - 20:20
Solar charger shutoff
I'm charging 2 Nimh batteries using a solar cell and a diode. The max current of the solar cell is well below the C/10 trickle charge rate of the battery. I'd like to make sure...
Wednesday, 9 September 2009 - 14:04

Pages