Type in the full discussion title or a part of it.
Discussion Title Created date
Which programmer is right for me?
I've been home programming my AVR micros for awhile, using a simple parallel port programmer cable and AVRdude to load hex files via SPI. However, I recently blew my parallel...
Thursday, 31 May 2007 - 19:20
How would you test your parallel port?
Recently in a fit of lunacy, I accidentally powered my ATmega8 at 30V by hooking up -24V to the ground instead of common. This same micro was then attached to my PC through a...
Wednesday, 2 May 2007 - 21:15
USART Serial - This should be simple!
I am attempting to interface my ATmega8 with a Visual Basic GUI, using the USART and a RS232 Conversion module to send and receive characters between the two. I'm starting simply...
Sunday, 15 April 2007 - 17:19
How do you identify fuse bit functions?
I've been programming my AVRs using avrdude, but have been running into issues lately regarding the fusebits on my ATmega162. The problem lies with how AVRDUDE programs the bits...
Tuesday, 3 April 2007 - 23:58
WinAVR/GCC makefile issues
Historically I have used Codevision and a bootloader for my compiling/programming needs, but recently I have been attempting to switch to WinAVR as I've expanded beyond my...
Sunday, 18 March 2007 - 20:05
Synchronous Serial on the ATmega162
I am attempting to interface my ATmega162 with a ADS7843 serial touchpanel controller. In order to synchronize the serial data between the controller and the micro I need to...
Sunday, 11 March 2007 - 10:12