Post Created date
Question about timer
Use 16MHz Crystal for maximum speed count. It is 16 bit. for expanding, append upper bytes in the interrupt overflow routine. before reading 16 bit counter register, check...
Saturday, 30 May 2009 - 13:46
Desing a AVR based DC Power Supply(Thinking Stage!)
Quote:for the sake of discussions let us assume that a output range of 5v-30v is required(lets call it V_Desired), Current not exceding 1 Amp(Imax), Input voltage after...
Thursday, 28 May 2009 - 20:28
Building a sine wave lookup table
using an active filter, its possible to convert Square to Sine wave. it means you have to only generate 1MHz 50% Square wave. Also, do visit
Thursday, 28 May 2009 - 16:50
Desing a AVR based DC Power Supply(Thinking Stage!)
using non switch mode configurations (such as lm317), you will waste input power. by the way, Lm317 only work till 37 Volts ! Regards A.R.Khorasani http://www....
Thursday, 28 May 2009 - 16:40
DIY Time Clock Project
Hi, some parts are: ATMEGA16L (flash+eeprom+rtc+uart) 8.000 XTAL 32.768KHZ XTAL Backup Battery MAX232 or HIN232 rs232 cable also, please be informed that RFID / contactless cards...
Thursday, 28 May 2009 - 08:42
Is there any rule to change registers inside interrupts?
Try OCR1AH=OCR1Avalue>>8; OCR1AL=(unsigned char)OCR1Avalue; Regards A.R.Khorasani
Thursday, 28 May 2009 - 08:17
Desing a AVR based DC Power Supply(Thinking Stage!)
Quote:I am thinking more on the lines of PWM and Mosfets Besides i want to make my own little baby!!. after filtering your input power with 12uH/1A and then 6800uF/63V parts, its...
Thursday, 28 May 2009 - 07:39
Building a sine wave lookup table
Hi, you receive sine wave after filtering the pwm square wave. as we see in also, - can define look up table in flash...
Wednesday, 27 May 2009 - 16:39