Post Created date
How do I set clk fuses on ATTiny84 using JTAGICE mkII?
All, From what I can tell, the device is using dbugwire. Correct me if I am wrong but I don't think the fuses can be changed when accessing the part in this mode. Is there a way...
Thursday, 15 August 2013 - 21:11
How do I set clk fuses on ATTiny84 using JTAGICE mkII?
John, Wit and helpful advice. I cannot locate the programing page. Where is it located? Thanks, A.
Thursday, 15 August 2013 - 20:50
How do I set clk fuses on ATTiny84 using JTAGICE mkII?
I have tried in edit but cannot find the button to do so. A.
Thursday, 15 August 2013 - 20:36
CO-AX vs "ground plane"
Kas, This is basically how the project is currently designed. Our design places the amplifier as close as hardware would allow to the probe. The filtered and amplified signal is...
Friday, 10 February 2012 - 13:28
CO-AX vs "ground plane"
Jim, Thanks for the input ( no pun intended ) A.
Wednesday, 8 February 2012 - 20:47
CO-AX vs "ground plane"
Jim, Thank you for the reference. The drop sizes are actually orders of magnitude smaller that rain drops. ( 10-25 picolitres ). We detect the charge on eight drops in succession...
Wednesday, 8 February 2012 - 20:23
CO-AX vs "ground plane"
Chuck-Rowst, Thank you for your response. You are correct of course, it is in fact shielded cable but I believe co-ax also refers to its structure. As far as equipment goes, I...
Wednesday, 8 February 2012 - 18:43
Need optoisolator in a small pkg
Kartman, Isolation voltage is minimal ( 1kV should be fine ). The device has to fit in a confined space. My search has me looking at some Vishay parts. In particular the TLCD100...
Monday, 21 November 2011 - 15:02
Is it a good idea to share ( a clk )?
Lee, Beat Cliff, this I gotta see. A. All, I have to see if the CLK/OUT pin is available. Thanks, A.
Wednesday, 20 July 2011 - 20:09
Is it a good idea to share ( a clk )?
Freaks, I should have been a little clearer. It's a mega1281 I am using. Chuck, This was essentially my plan. I have boards up and running with three xtals. I think I will break...
Wednesday, 20 July 2011 - 16:39
Is it a good idea to share ( a clk )?
Leon, The plan is to daisy chain them together. It is my understanding that the input on the second mega128 can be set up to be less of a load. Thanks, A.
Wednesday, 20 July 2011 - 15:17
malloc() and the unused pointer.
Cliff, I have some dated reference books that refer to a table when free() is de-allocating memory. I'm read'n but maybe its the wrong stuff. If I move the initial pointers/...
Wednesday, 13 July 2011 - 17:11

Pages