Tool to analyze function performance? clawson wrote:To do something similar for an AVR it would have to be based around an AVR simulator but one that has hooks to log the instruction fetches.
AVR System emulator —...
Tuesday, 27 July 2021 - 12:04
Tool to analyze function performance? westfw wrote: (or elsewhere)A sound static analyzer; Frama-C has sound static analysis and, IIRC, there are a relative few others.
westfw wrote:(How about one that measures code...
Tuesday, 27 July 2021 - 02:49
DIY analogue clock project mojo-chan wrote:Main issue is that very few have any way of detecting the position of the hands, and I need to do that.
...
Anyone know of any other motors, ideally triaxial ones...
Monday, 26 July 2021 - 17:40
Programming AVR controllers without Atmel Studio. ki0bk wrote:... then used simple DOS batch files that could be launched with a few clicks of the mouse.... or C#
User Guide | Using Atmel-ICE for AVR®...
Monday, 26 July 2021 - 13:44
Programming AVR controllers without Atmel Studio. clawson wrote:(I seem to remember it needs to see all the ATDF files).
atprogram standalone utility
[mid-page]
copy packs directory
via CommunityKnowledge (enter atprogram)
via...
Monday, 26 July 2021 - 13:34
Programming AVR controllers without Atmel Studio. AVRDUDE though via libusb instead of WinUSB in Atmel Studio 7.0.1416 and subsequent.
avrdude returns 53 | AVR Freaks
Microchip Studio for AVR® and SAM Devices | Microchip Studio...
Monday, 26 July 2021 - 12:38
XMEGA Lead Time, Dec'20 F Schneider wrote:Do you guys trust in all distributors pointed by Octoparts.com?Have experience with only a few distributors at Octopart.
https://octopart.com/search?q=...
Monday, 26 July 2021 - 12:22
Comfused with AVR bootloader flash section
AmVRosia wrote:but you mentioned it does not.then I'm mistaken.
AmVRosia wrote:Unless the logic analyzer does it itself.Indeed
AmVRosia wrote:But what is the benefit on bare...
Monday, 26 July 2021 - 00:40
Is the XMega going End of Life (EOL) ??? Quote:... (Rochester Electronics,
Semiconductor Shortages: It’s Not the End of the Line | Electronic Design
by Ken Greenwood [Technical Sales Manager EMEA, Rochester Electronics]...
ATTINY24A operating at low voltage less 1.8 volts Welcome
ingramjohn wrote:... but could it partially operate at 1V ?No (1.0V < 1.3V = VPOA typical)
ingramjohn wrote:Also would the reset circuit function properly if supply...
Saturday, 24 July 2021 - 01:05
USB DFU internal firmware reset XMegaA1UXPlainedPro fwe wrote:Based on a character received by the USB, I want to issue a WDT reset to jump to bootloader.fyi, there's a software reset.
XMEGA AU Manual - Atmel-8331-8-and-16-bit-AVR-...
clawson wrote:To do something similar for an AVR it would have to be based around an AVR simulator but one that has hooks to log the instruction fetches. AVR System emulator —...
westfw wrote: (or elsewhere)A sound static analyzer; Frama-C has sound static analysis and, IIRC, there are a relative few others. westfw wrote:(How about one that measures code...
mojo-chan wrote:Main issue is that very few have any way of detecting the position of the hands, and I need to do that. ... Anyone know of any other motors, ideally triaxial ones...
ki0bk wrote:... then used simple DOS batch files that could be launched with a few clicks of the mouse.... or C# User Guide | Using Atmel-ICE for AVR®...
clawson wrote:(I seem to remember it needs to see all the ATDF files). atprogram standalone utility [mid-page] copy packs directory via CommunityKnowledge (enter atprogram) via...
AVRDUDE though via libusb instead of WinUSB in Atmel Studio 7.0.1416 and subsequent. avrdude returns 53 | AVR Freaks Microchip Studio for AVR® and SAM Devices | Microchip Studio...
F Schneider wrote:Do you guys trust in all distributors pointed by Octoparts.com?Have experience with only a few distributors at Octopart. https://octopart.com/search?q=...
AmVRosia wrote:but you mentioned it does not.then I'm mistaken. AmVRosia wrote:Unless the logic analyzer does it itself.Indeed AmVRosia wrote:But what is the benefit on bare...
Quote:... (Rochester Electronics, Semiconductor Shortages: It’s Not the End of the Line | Electronic Design by Ken Greenwood [Technical Sales Manager EMEA, Rochester Electronics]...
likewise Ambiq Apollo3 - Ambiq
Welcome ingramjohn wrote:... but could it partially operate at 1V ?No (1.0V < 1.3V = VPOA typical) ingramjohn wrote:Also would the reset circuit function properly if supply...
fwe wrote:Based on a character received by the USB, I want to issue a WDT reset to jump to bootloader.fyi, there's a software reset. XMEGA AU Manual - Atmel-8331-8-and-16-bit-AVR-...
Pages