Post Created date
SuSE 10 build environment for NGW100 kernels
Hi Landon, Good to see that you're back at it.. We'll get this thing figured out soon enough.. So I got a response from my email to avr32@atmel.com claiming that the ngw build...
Saturday, 26 May 2007 - 00:08
Connecting an USB host chip
squidgit wrote:I'm pretty sure you can DMA to the external world, after all, there are DMA_RQ and DMA_ACK lines brought to the outside worldglenn.west@aarcorp.com wrote:Yes, I...
Friday, 25 May 2007 - 21:06
Connecting an USB host chip
Hi Glenn, Taking a look at the docs, it doesn't seem that the AP7000 allows for any external DMA. Specifically, DMA is never mentioned in relation to the EBI.. Does this mean...
Friday, 11 May 2007 - 00:44
SuSE 10 build environment for NGW100 kernels
I've emailed avr32@atmel.com and requested the build script.. Please do the same if you would like a solid starting point for development with the NGW.. HCE: Is there any...
Friday, 4 May 2007 - 22:59
Python on avr32
Hi Bwon, I used your patch and followed the instructions located at http://www.avr32linux.org/twiki/... This is an avr32 specific derivative of the arm example above. (This was...
Friday, 4 May 2007 - 22:35
SuSE 10 build environment for NGW100 kernels
Hi Landon, First of all, thanks for documenting this process.. It has helped me (and I'm sure many others) a lot in navigating the build process in terms of differences from the...
Friday, 4 May 2007 - 18:25
Pin Change Interrupts - Tiny26
Here's the solution: Quote:You need to set the ACD bit in ACSR to disable the analog comparator; PA6 and PA7 go to the analog compator by default, and the pin change interrupts...
Tuesday, 2 January 2007 - 02:09
Pin Change Interrupts - Tiny26
Unfortunately, avcc and agnd are tied to vcc and gnd.. I've tried swapping out the chips multiple times, and used both tiny26 and tiny26L, with the same results each time.. very...
Monday, 1 January 2007 - 18:10
Pin Change Interrupts - Tiny26
I guess I'm using a jacked up t26def.inc file but IOPINSaddr is just a .equ which gets swapped to $002 at compile time.. .equ IOPINSaddr = $002 Plus, I'm getting to the...
Sunday, 31 December 2006 - 20:36
Pin Change Interrupts - Tiny26
Hi Lee, I have already set up the vector table and my interrupt service routine is being called based on a pin cange on PA3 .. This is how I know the pin change interrupt is...
Saturday, 30 December 2006 - 23:31