Post Created date
Trace Debugging SAMD51
That seems like a good idea. Can you suggest any links / guides?   Which other IDEs would support Atmel-ICE? So Atmel-ICE is capable of ETB sniffing? Does it need the SWO pin...
Monday, 16 November 2020 - 05:28
Trace Debugging SAMD51
Ok so Atmel-ICE does not support trace capability for sure? I think it does ITM trance using SWO pin? But I wish to use the ETB as I have used up the 64pin package is not suitable...
Sunday, 15 November 2020 - 23:56
Trace Debugging SAMD51
Hoping not to have to buy any new debugger. I would have thought Atmel-ICE was able to debug using SWD port... I just need something similar that we see in SAMD2x M0+ with MTB and...
Wednesday, 11 November 2020 - 10:07
minimalistic printf library for UC3A / AVR32
I am using a fair bit of sprintf and printf in the program. So using the built in library is very convenient. 8K flash space is a lot when I am running out of 256K space! I am...
Friday, 9 October 2020 - 12:46
Profiling 100s of structs to be 4 byte aligned.
Yes I am sure it does, appropriately or otherwise. And there is then the CPU hang....and watchdog reboots. This is all known cases. So I am trying to see if there is a way to...
Thursday, 27 August 2020 - 22:45
Latch On until load current continues
awneil wrote: That does not do what you stated in the OP: it's a "push for on; push again for off" - it's not a "hold until the load stops".   So is that what you want...
Monday, 23 March 2020 - 10:29
Latch On until load current continues
Ok I will look into SCR/Thyristor option. I thought this could be neat circuit: https://www.edn.com/latching-pow... Just need to remove C1 and R2.
Monday, 23 March 2020 - 10:17
Latch On until load current continues
Needs to be DC circuit...DC motor control. To make it complicated I need to make it run in reverse direction as well.
Monday, 23 March 2020 - 10:06
DMX New AVR Programmer
amazing!
Friday, 11 October 2019 - 11:12
DataSizeViewer with AtmelStudio 7 and AT32UC3A
No one faced this issue?
Monday, 6 May 2019 - 12:28
MPLAB Snap
When will they provide an updated AtmelStudio that uses MPLAB SNAP as debugger/programmer? :(
Thursday, 11 April 2019 - 02:38
New BLDC motor control project: need help
If this is for educational purposes....watch some of my videos on youtube (3pinmicro).
Tuesday, 13 November 2018 - 01:15

Pages