Post Created date
Looking for c code to format MMC/SD card
FSINFO is only a FAT32 thing. If you're doing a FAT16 drive, then it's not required. For FAT32, there's a field in the BPB for which sector is being used as FSINFO. There's a...
Thursday, 31 January 2008 - 17:30
SD card missing MBR
You can tell if it's a BPB by looking at the jump instruction that should occupy the first 3 bytes. It'll be 0xE9 0x00 0x90. In an MBR, the first three bytes will be 0. If you...
Thursday, 31 January 2008 - 17:16
Keeping a cable from pulling loose from pcb
Something like this is what bob was mentioning: You should be able to find them from any local electronics store or maybe even a hardware store. Pop one of those in for strain...
Wednesday, 30 January 2008 - 17:32
Looking for c code to format MMC/SD card
Doesn't even need an MBR if you don't want. A partition boot record in sector 0 is sufficient unless you actually need 2+ partitions. You'll just need to set up the boot record,...
Wednesday, 30 January 2008 - 17:27
Problem using UART and LCD
Remove the extra ='s sign from line 28 and it should work fine. Seriously, though... How much help do you expect us to be? You've essentially said "I wrote some code and it doesn'...
Wednesday, 30 January 2008 - 08:05
Newbie using maing RGB need help
bobgardner wrote:Can you read? That will help. hehehe :lol:
Wednesday, 30 January 2008 - 08:02
Camping Stove temperature control idea, in search of advice
wadester13 wrote:if the doughnuts are not unison than the temp of the oil has no basis. Not true. A thin donut should fry at the same temperature as a thick one, just not as long...
Wednesday, 30 January 2008 - 08:01
Camping Stove temperature control idea, in search of advice
wadester13 wrote:Cooking on an open flame requires more than oil temp since it will change with the outside conditions. When they look done pull them out. Its about camping not...
Tuesday, 29 January 2008 - 16:31
Newbie using maing RGB need help
Look in the tutorials thread or search the forums or search google. There's countless posts and info on timers here. At least put some effort into it yourself, let us know what...
Tuesday, 29 January 2008 - 16:22
Camping Stove temperature control idea, in search of advice
Measuring the flame temperature won't work except if all you're interested is heating up oil with nothing in it to a certain temperature and given enough time. As soon as you put...
Monday, 28 January 2008 - 04:04
Camping Stove temperature control idea, in search of advice
Only issue with that is that it'd be harder to remove the device so you could use the stove normally, which I assume is what you'd want in everything but the donut-making case....
Monday, 28 January 2008 - 03:01
Camping Stove temperature control idea, in search of advice
Went to try and find an electronics propane valve and after a bunch of searching, I came back to make the same suggestion that knutbr already made =) I couldn't even find an...
Monday, 28 January 2008 - 00:59

Pages