Discussion Title | Created date |
---|---|
Interrupt on LUFA VS RX Seen things touching on this in other posts, but many are outdated so wondering if anyone (read 'Dean' ;) knows an easy way to somehow tap into an RX interrupt on the LUFA virtual... |
Tuesday, 5 March 2013 - 14:28 |
Issue with DebugWire on ATMega32U2 Having an issue getting any communication after enabling debugwire on an ATMega32U2 chip via a Dragon. Before enabling it, ISP communication was no problem with AVR studio.... |
Thursday, 28 February 2013 - 21:13 |
Dragon under VMWare Windows session There's a couple posts touching a bit on this, but I haven't found a definitive answer and I'm not familiar enough with how VMWare deals with USB devices. Does anyone know if AVR... |
Thursday, 24 April 2008 - 21:47 |
Error in Eagle ERC Not really AVR specific, but the schematic does contain an AVR =) When running ERC in eagle, I'm getting this: ERROR: OUTPUT and SUPPLY Pins mixed on net +5V I assume it's because... |
Tuesday, 13 November 2007 - 18:30 |
Powering LM95071 (need analog help =) Have a wierd issue with an RTC and a couple temperature sensors connected to my m168. What I've got is a little box that keeps track of power outages and fridge/freezer... |
Thursday, 29 March 2007 - 17:36 |
AVR & SPI w/ DS1306 RTC I was having some issues trying to communicate with DS1306. I managed to get the communication working (am able to both read and write), but there's still something that's puzzled... |
Tuesday, 13 February 2007 - 18:34 |
Crystal capacitance I've read several tutorials and the like on this, but I'm still a bit confused. If I want to drive an AVR with a 3.6864 MHz crystal and I find one on digikey that states 18pF load... |
Wednesday, 31 January 2007 - 03:56 |
Driving 1.8v Signals I'm running an AVR at 3.3 but need to control a component that uses 1.8v for I/O. I know I could run it through a level shifter, but if the signals are all unidirectional (AVR->... |
Friday, 1 December 2006 - 15:41 |
Serial Bit-bang Programmer w/ MAX232 I'm trying to make a serial + parallel port programmer. The parallel port is just the schematic taken from here: http://www.xs4all.nl/~sbolt/Images/icp_interface.gif The serial... |
Monday, 30 October 2006 - 19:24 |