Type in the full discussion title or a part of it.
Discussion Title Created date
ATtiny15 fried.. Something wrong with my schematic ?
The board couldn't be more simple, but is it too simple ? It's an sender for IR beam barrier. It would have cost the same to do it the analog way so I desided to use a ATtiny15...
Friday, 22 July 2005 - 15:30
How to port this code ?
I want to use the code below from embedded.com for my switch debouncing. The problems is that my version of the code works only after releasing the button. It's supposed to detect...
Thursday, 19 August 2004 - 18:27
What's wrong with this ?
I'm trying to make a IR-beam barrier using tiny15 and normal ir-receiver. The code I have uses timer 1 PWM for the 38kHz ir pulse. Also it's switched on and off every 500 us. The...
Tuesday, 10 August 2004 - 19:01
Mysterious flashing problems...
I can't write anything to my ATmega8. I can read everything, but if I try to program anything, it locks, and displays all FF's, device signature, flash, eeprom, fuses, lock bits,...
Wednesday, 4 August 2004 - 11:36
Long cable and external interrupt
I'm developing a timer system for dog agility matches. Using ATmega8 for the timing and display etc. and planning to use tiny15 for the start and stop ports. My question is, will...
Tuesday, 20 July 2004 - 15:05
Beginner problems...
I'm trying to make an ir beam barrier using ir receiver module. The thing is that I cannot get the code working so that it lights up a led if there is atleast one pulse in 20 ms...
Sunday, 18 July 2004 - 08:41