Post Created date
AVR Studio 4.17 Release Candidate
Trym wrote:We have tested on Vista 64 and it should work. We also test on Windows 7 32/64 but the Jungo usb-driver does not work. Jungo has promised us a beta of the driver as...
Tuesday, 21 July 2009 - 02:54
AVR Studio 4.17 Release Candidate
clawson wrote:Win 7 isn't Vista 64 is it? Why do you think that because Vista 64 support has been fixed that it would work on Win 7? (my money would be on 2010 for that). If...
Sunday, 19 July 2009 - 21:18
AVR Studio 4.17 Release Candidate
Quote:6093 USB driver installation on Windows Vista x64. Upgraded to latest Jungo driver. Anyone have any luck with this in win 7? I installed 4.17, dragon driver didn't want to...
Sunday, 19 July 2009 - 10:51
Easiest way to build a USB Fan Controller?
steve17 wrote:You mentioned USB or serial controller. The best fan controllers are independent of the PC's CPU. The fans have to be running independent of any operating system...
Saturday, 13 September 2008 - 00:52
AVR Dragon was cracked! No 32k code size limitation~~
Thanks for posting this :) I just did some very quick testing, and its definitely running my code. Will have to check it out more tomorrow.
Friday, 15 August 2008 - 03:58
Custom made low Voltage ultra low ESR Capacitor
Could you tell us what you are going to be doing with 1000A of ripple current, and at what frequency? Does the capacitance need to be exactly 120,000uF, if not, would more reduce/...
Tuesday, 13 May 2008 - 01:37
TFT-LCD Backlight (6x Series LEDs) Driver
What are you using to control the TFT? Could you use some spare I/O from that to do sequencing (and allow you to turn the backlight off as needed)?
Friday, 25 April 2008 - 23:22
How do I send and receive data through CAN?
http://www.atmel.com/dyn/resourc... http://www.atmel.com/dyn/resourc...
Friday, 25 April 2008 - 00:13
Power Isolator
What about something like this? http://www.newark.com/61K3411/po... You might either need a load resistor, or a LDO on the output as the voltage could be a tad high if unloaded....
Wednesday, 23 April 2008 - 19:13
Any recommendations for a new multimeter
microcarl wrote:And that is worse then the whole meter going down the drain? That be the case with anything other then a Fluke... Any half decent meter will have a fuse. If you...
Sunday, 6 April 2008 - 02:54
Any recommendations for a new multimeter
Manual range meters are a pain in the ass, I wouldn't pay that much for one personally. The problem with the fluke meter as a beginner meter is when you're doing current...
Friday, 4 April 2008 - 23:45
buying parts from china
Whats the part? You can check various other distributor sites, occasionally the prices between them vary widely. www.newark.com, www.mouser.com, www.futureelectronics.com, etc.
Friday, 4 April 2008 - 01:05

Pages