Post Created date
Been awhile - programming C on Tiny chips with STK500?
Thanks again for the advice. I ended up trying an SOIC Tiny85 (I'll probably end up using the 25 for this). It's a great chip and was an easy port from my Mega88 program. Perfect.
Saturday, 26 May 2012 - 01:19
Been awhile - programming C on Tiny chips with STK500?
That Tiny25/45/85 line is pretty nice. So many options, I missed those.
Sunday, 20 May 2012 - 02:34
Been awhile - programming C on Tiny chips with STK500?
Thank you for all of the replies. Regarding size, it's the pin count in looking at right now. Ultimately in a production version I'd love those super tiny chips, but I am hand...
Saturday, 19 May 2012 - 16:03
Proper battery cut-off handling?
Thanks for replies. I'm using Mega88, and in the future will move to the newer version of it.
Wednesday, 31 March 2010 - 04:43
Help with small battery selection?
Testing with a LIR2450 and with your help, I think I found a few good charging solutions: LTC4054L LTC4062L A helpful related document: http://cds.linear.com/docs/Solutions%...
Tuesday, 2 March 2010 - 21:14
Help with small battery selection?
Great info, thank you I'll look into your suggestions.
Sunday, 28 February 2010 - 19:37
Help with small battery selection?
No, it cannot. But couldn't I use a current limiting resistor on the charge pin? It charges 280mA using a DC source or 100mA using USB. 100mA is the Max Charge rate for the cell,...
Sunday, 28 February 2010 - 08:14
Help with small battery selection?
Thank you. Does anyone have experience with charging these batteries? I am looking at USB using a max1551.
Sunday, 28 February 2010 - 00:40
Help with small battery selection?
Okay I think I understand but if someone could confirm. A 1C charge/discharge on a 1000 milliamphour battery is 1000 milliamps or 1 amp?
Saturday, 27 February 2010 - 19:17
Help with small battery selection?
True. I was also factoring in that the device is not running continuous but pulsing. I came across the LIR2450 and LIR2477 as possible solutions. Their sustainable discharge...
Saturday, 27 February 2010 - 16:53
Help with small battery selection?
Thanks for the reply.
Saturday, 27 February 2010 - 05:25
Help with understanding delay precision?
Thanks. Didn't understand the CKDIV8 setting before. I tried dividing my delays by 8 @ 8Mhz and got the expected result. Then unchecked the CKDIV8 and got the expected result...
Sunday, 21 February 2010 - 09:47

Pages