Post Created date
AVR 2 AVR over TWI
Agreed, using TWI requires more programming since there is no errorhandling in HW, so all errorhandling has to handled in SW. But if you carefully read the manual or find some...
Friday, 1 May 2009 - 19:05
AVR Studio vs IAR Embedded Workbench
IAR is better :) But as Ahmad said, AVRstudio is free, and you still need it to send program to µC. But I like IAR for writing and compiling code
Thursday, 17 July 2008 - 10:44
ATmega640 power limits
Look in the datasheet under electrical specs or something, all the maximum ratings are listed there.
Thursday, 1 May 2008 - 15:44
USB programming board
You could try the stk500 and make a serial->usb converter with some ftdi chips or something.
Monday, 28 April 2008 - 09:23
c program+help me
learning how to use the keyboard would be good start yes :) Well you could try to learn some C ? I'd guess if you try searching "C tutorial" in google you'll get loars of hits...
Monday, 28 April 2008 - 09:22
hmm... well if the source code wasn't pasted with the schematics you probably won't. since the code has to match this exact circuit.
Saturday, 26 April 2008 - 08:10
How to tell SPI is working?
hehe, true there are some pitfalls when using spi, but fortunately most of them you only do once :)
Saturday, 26 April 2008 - 08:05
New user in AVR Studio 4
Quote:No it doesn't. It starts running the code in the simulator, not the AVR Assuming you have selected simulator yes, but if you select for instance JTAG ICEMK2 and target...
Saturday, 26 April 2008 - 08:03
face recognition with CMU/AVR CAM?
use FPGA!!!
Friday, 25 April 2008 - 23:23
How to tell SPI is working?
cannot belive how many people can't figure out how SPI works!!! It's it the easiest thing on avr ?
Friday, 25 April 2008 - 23:22
New user in AVR Studio 4
first off all, start a new project, then write your code, then ctrl+F7 ( compile and run ). AVR studio then automaticly transfers the program to the cpu, and resets the device...
Friday, 25 April 2008 - 23:19
Temperature sensor Project
Well there are a bunch of tutorials out there , have you tried to google it ? You can begin by installing winavr for avr studio, that will get you the C compiler. For information...
Thursday, 17 April 2008 - 08:32