Post Created date
Dragon and Female Headers/Sockets
digitool wrote: A lot of the surplus outlets that used to thrive in this area have all but gone away. Pete It was quite recent for the audio cables, and all computershops that...
Saturday, 30 June 2007 - 18:49
Dragon and Female Headers/Sockets
Some computershops also dismantle old pc's You can sometimes get the led and switch cables for very little money, join two of the m together and presto , 2 and 3 pin cables with...
Saturday, 30 June 2007 - 17:36
Dragon and Female Headers/Sockets
digitool wrote:Parallax has an extension cable with both ends being female,at about 2$ a pop (they throw in a 3 position male header too)which is hard to find in hobby shops. You...
Saturday, 30 June 2007 - 17:13
Can't get my butterfly to work!
On the Smilymicro's Butterfly carrierboard there are two pinhearders next to the com port connector, did you wire pin 2 to RXD and pin 3 to TXD?, if yes please try them the other...
Saturday, 30 June 2007 - 10:52
Dragon and Female Headers/Sockets
See the end of a topic of mine for some (bad) pictures
Saturday, 30 June 2007 - 10:26
Dragon and Female Headers/Sockets
I went with the male hearders and made a couple of little prototyping pcb's with the female connectors on it. So if i want to program a different AVR i just swap the pcb and go,...
Saturday, 30 June 2007 - 10:24
IP restarter
yeager wrote: something like this is what i need, have anyone a completed solution? or have anyone tested it? I've got one here(with lcd version), the layout of the old board isn'...
Saturday, 16 June 2007 - 11:28
IP restarter
yeager wrote:Sorry i have found it too. But it cost 50$ and for 60$ i can buy a completed device IP/GSM restarter Take a look at http://...
Tuesday, 12 June 2007 - 11:03
Wireless communication
dharper wrote:Take a look at the MaxStream ZigBee modules. They are great, And nice and small. Take care in looking at the different versions and antenna's. Maxstream was...
Tuesday, 12 June 2007 - 08:16
AVR Microcontroller with 2+ RS232 lines
js wrote:Quote: Well whaddayaknow :? I din't believe you so I checked up on the Atmel site and you are correct... You weren't the only one, just bought 4 of them for their second...
Saturday, 9 June 2007 - 21:14
atmel 32 and image processing
Maby an option if the other stuf doesn't work In the Real robots they used a ball with IR leds and IR recievers in the robots. It was able to play with other robots and make...
Friday, 8 June 2007 - 08:39
Dragon lair (antistatic)
Some (unsharp) pictures The little pcb's are to connect the prototyping area quicly, just put the right one on and program I hotglued the pcb while sill sitting on its antistatic...
Monday, 4 June 2007 - 21:04